首页 | 本学科首页   官方微博 | 高级检索  
     

利用电光强度调制器频移特性实现可调延迟
引用本文:陈颖,赵芬芬,毕卫红. 利用电光强度调制器频移特性实现可调延迟[J]. 强激光与粒子束, 2012, 24(9): 2085-2088. DOI: 10.3788/HPLPB20122409.2085
作者姓名:陈颖  赵芬芬  毕卫红
作者单位:1.燕山大学 电气工程学院, 河北 秦皇岛 066004;
基金项目:国家973计划项目(2010CB327801); 国家自然科学基金项目(61172044); 中国博士后基金项目(2012M510765); 河北省科技支撑计划项目(10213569)
摘    要:针对光纤通信系统中数据同步处理时对脉冲可调延迟的要求,提出了一种可调延迟器的结构设计方案。对电光强度调制器(EOIM)的光频移特性进行了研究,基于EOIM对各级边带和强度的调制作用,利用EOIM对受激布里渊散射慢光装置中的泵浦光进行强度调节,从而实现延迟量可调。建立了可调延迟的数学模型,通过实验研究分别得出了在一定微波调制功率下EOIM调制深度和直流偏置电压随脉冲延迟量的变化关系。从实验结果中可以看出:在引起失真的主要因素为零的情况下,当直流偏置电压为半波电压的1/2时,脉冲相对群延迟随调制深度的增大逐渐减小;当调制深度为1.39时,脉冲相对群延迟随直流偏置电压的增大逐渐增大,延迟量最大可达到未调制情况下的1.106倍,实现了较大范围的延迟量调节。

关 键 词:可调延迟   受激布里渊散射   慢光   电光强度调制器   频移
收稿时间:2012-01-06

Adjustable delay analysis using frequency shift characteristics of electro-optic intensity modulator
Chen Ying,Zhao Fenfen,Bi Weihong. Adjustable delay analysis using frequency shift characteristics of electro-optic intensity modulator[J]. High Power Laser and Particle Beams, 2012, 24(9): 2085-2088. DOI: 10.3788/HPLPB20122409.2085
Authors:Chen Ying  Zhao Fenfen  Bi Weihong
Affiliation:1.College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China;2.College of Information Science and Engineering,Yanshan University,Qinhuangdao 066004,China
Abstract:To meet the requirements of the adjustable delay of the pulse in the data synchronization processing of optical communication systems, a structural design scheme of adjusting the delay has been proposed. The light frequency shift characteristics of electro-optic intensity modulator (EOIM) have been analyzed, and based on the modulation of EOIM to the sideband and the light intensity, the delay adjusting could be achieved by regulating the pump light of the stimulated Brillouin scattering slow light. The mathematical model of the pulse delay has been established, and the modulation depth and the DC bias voltage varying with the pulse delay have been stimulated respectively at a fixed microwave frequency. From the experimental results, it is shown that the pulse delay gradually decreases with the increasing of modulation depth when the size of the DC bias voltage is half of the half-wave voltage, and the pulse delay gradually increases with the increasing of the DC bias voltage when the modulation depth is 1.39. The maximum delay can attain to 1.106 times the delay without modulation, which means adjustable delay is achieved effectively.
Keywords:adjustable delay  stimulated Brillouin scattering  slow light  electro-optic intensity modulator  frequency shift
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号