| Preparation of Mg55Ni35Si10 Amorphous Powders by Mechanical Alloying and Consolidation by Vacuum Hot Pressing |
| |
| 引用本文： | 杨登科 文翠娥 韩福生 王清周 李海金. Preparation of Mg55Ni35Si10 Amorphous Powders by Mechanical Alloying and Consolidation by Vacuum Hot Pressing[J]. 中国物理快报, 2006, 23(8): 2161-2164 |
| |
| 作者姓名： | 杨登科 文翠娥 韩福生 王清周 李海金 |
| |
| 作者单位： | [1]Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031 [2]School of Engineering and Technology, Deakin University, Geelong Victoria 3217, Australia [3]不详, Deakin University, Geelong Victoria 3217, Australia |
| |
| 基金项目： | Supported by the Natural Science Foundation of Anhui Province under Grant No 050440601. |
| |
| 摘 要： | Amorphous Mg55Ni35Si10 powders are fabricated by using a mechanical alloying technique. The amorphous powders are found to exhibit a relatively high crystallization temperature of 380℃. The as-milled amorphous Mg55Ni35Si10 powders are consolidated successfully into bulk body by vacuum hot pressing technique. Limited nanocrystallization is noticed. The Vickers microhardness range of the Mg55Ni35Si10 bulk sample is 7834 to 8048 MPa. Its bending strength and compressive strength are 529 MPa and 1466 MPa, respectively.
|
| 关 键 词： | Mg55Ni35Si10无定形粉体 机械冶金 真空热压 高结晶温度 |
| 收稿时间： | 2006-04-11 |
| 修稿时间： | 2006-04-11 |
Preparation of Mg55Ni35Si10 Amorphous Powders by Mechanical Alloying and Consolidation by Vacuum Hot Pressing |
| |
| YANG Deng-Ke,WEN Cui-E,HAN Fu-Sheng,WANG Qing-Zhou,LI Hai-Jin. Preparation of Mg55Ni35Si10 Amorphous Powders by Mechanical Alloying and Consolidation by Vacuum Hot Pressing[J]. Chinese Physics Letters, 2006, 23(8): 2161-2164 |
| |
| Authors: | YANG Deng-Ke WEN Cui-E HAN Fu-Sheng WANG Qing-Zhou LI Hai-Jin |
| |
| Affiliation: | 1 Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031;2.School of Engineering and Technology, Deakin University, Geelong Victoria 3217, Australia |
| |
| Abstract: | Amorphous Mg55Ni35Si10 powders are fabricated by using a mechanical alloying technique. The amorphous powders are found to exhibit a relatively high crystallization temperature of 380°C. The as-milled amorphous Mg55Ni35Si10 powders are consolidated successfully into bulk body by vacuum hot pressing technique. Limited nanocrystallization is noticed. The Vickers microhardness range of the Mg55Ni35Si10 bulk sample is 7834 to 8048MPa. Its bending strength and compressive strength are 529MPa and 1466MPa, respectively. |
| |
| Keywords: | 61.43.Dq 81.05.Zx 81.20.Ev |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《中国物理快报》浏览原始摘要信息 |
|
点击此处可从《中国物理快报》下载免费的PDF全文 |
