|
|||||
|
|
| 超高压氦增压系统研制 | |
| 引用本文： | 尹剑, 陈绍华, 张伟光, 等. 超高压氦增压系统研制[J]. 强激光与粒子束, 2010, 22(02). |
| 作者姓名： | 尹剑 陈绍华 张伟光 李海容 夏立东 |
| 作者单位： | 1.中国工程物理研究院 核物理与化学研究所, 四川 绵阳 621 900 |
| 摘 要： | 主要介绍了超高压氦增压系统的工作原理、设计原则和加工方法，讨论了各功能部件的选择与高压密封设计，同时指出了在使用超高压氦增压系统时应当注意的问题。在系统建成后，通过手动、自动控制分步增压和保压实现了最高300 MPa的超高压氦气输出，相应的高压漏率达到(3.5～5.0)×10-7 Pa·m3/s。对系统主要性能参数进行了考核，并将其与3种同类增压装置的相应参数进行了比较，结果表明该系统设计合理、性能优越并且安全可靠。该系统将主要应用于惯性约束微球靶充氘氚系统的各项性能测试。 |
| 关 键 词： | 惯性约束聚变 氦增压系统 超高压 高压漏率 |
Development of ultrahigh pressure helium booster system |
|
| yin jian, chen shaohua, zhang weiguang, et al. Development of ultrahigh pressure helium booster system[J]. High Power Laser and Particle Beams, 2010, 22. | |
| Authors: | yin jian chen shaohua zhang weiguang li hairong xia lidong |
| Affiliation: | 1. Institute of Nuclear Physics and Chemistry,CAEP,P.O.Box 919 220,Mianyang 621900,China |
| Abstract: | Operation principle, design principle, fabrication and cautions in operation of ultrahigh pressure He booster system are introduced, and main parts selection method and high pressure seal design of the booster system are discussed. The as developed system can output 300 MPa helium gas with (3.5～5.0)×1010-7 Pa·m3//s leak rate through manual or automatic pressure boosting and keeping. Main function parameters of the system are accessed and compared with those of three congeneric systems. The result shows that the system was rationally designed with superior performance and safety, and the system would be used to test ICF microsphere filling DT system. |
| Keywords: | icf he booster system ultrahigh pressure high pressure leak rate |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 | |
| 点击此处可从《强激光与粒子束》下载全文 | |