| 一种工业CT测量精度评估方法 |
| |
| 引用本文： | 陈思,陈浩,李敬,李寿涛,张小丽,雷德川. 一种工业CT测量精度评估方法[J]. 强激光与粒子束, 2013, 25(8): 2096-2100. DOI: 10.3788/HPLPB20132508.2096 |
| |
| 作者姓名： | 陈思 陈浩 李敬 李寿涛 张小丽 雷德川 |
| |
| 作者单位： | 1.中国工程物理研究院 应用电子学研究所, 四川 绵阳 621 900; |
| |
| 摘 要： | 为了验证工业CT系统对检测件的测量精度，设计了一套评估方法，针对由国家X射线数字化成像仪器中心自主研发的9 MeV 高能工业CT系统和450 kV工业CT系统，设计制作了标准测量试块，以三坐标测量机为辅助测量手段，对CT图像的线性尺寸、球面尺寸、角度尺寸、孔径尺寸和定位尺寸等进行对比测量，得到不同尺寸类型的测量误差。在不考虑尺寸类型的影响下，分别对铝、不锈钢和尼龙三种材料做了CT测量误差对比，结果表明，对于这三种材料来说，材料密度越大测量精度越高。实验结果表明，可验证工业CT系统对不同类型尺寸测量的精度，工业CT系统可完成精度较高的尺寸测量工作，特别对复杂结构的内部尺寸测量有一定的优势。
|
| 关 键 词： | 工业CT 尺寸测量 精度 评估 |
| 收稿时间： | 2012-12-07; |
Evaluation method of measurement accuracy for Industrial Computed Tomography |
| |
| Chen Si,Chen Hao,Li Jing,Li Shoutao,Zhang Xiaoli,Lei Dechuan. Evaluation method of measurement accuracy for Industrial Computed Tomography[J]. High Power Laser and Particle Beams, 2013, 25(8): 2096-2100. DOI: 10.3788/HPLPB20132508.2096 |
| |
| Authors: | Chen Si Chen Hao Li Jing Li Shoutao Zhang Xiaoli Lei Dechuan |
| |
| Affiliation: | 1.Institute of Applied Electronics of CAEP,Mianyang 621900,China;2.National X-ray Digital Imaging Instrument Centre,Mianyang 621000,China |
| |
| Abstract: | In order to verify the measurement accuracy of Industrial Computed Tomography (ICT), an evaluation method was designed and the standard measuring parts were made for the 9 MeV high-energy industrial CT system and 450 kV industrial CT system which were produced by National X-ray Digital Imaging Instrument Centre. The liner dimensions, the sphere diameters, the angle values, the apertures and the positioning dimensions were measured by CMM and CT system .Then comparing the results, after data analysis, different errors for these dimensions were acquired. For different materials of aluminum, nylon and stainless steel, higher density material with higher density has less measure error without considering the effect of the dimension type. These results validate the ability of industrial CT system as a high dimensional measuring machine for nondestructive examination. |
| |
| Keywords: | dimensional measurement accuracy verification & validation |
|
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|
