| 含预制裂纹L形梁柱试件动态断裂过程 |
| |
| 引用本文： | 李清,薛耀东,于强,徐文龙,韦贵华. 含预制裂纹L形梁柱试件动态断裂过程[J]. 爆炸与冲击, 2018, 38(3): 491-500. DOI: 10.11883/bzycj-2017-0255 |
| |
| 作者姓名： | 李清 薛耀东 于强 徐文龙 韦贵华 |
| |
| 作者单位： | 中国矿业大学(北京)力学与建筑工程学院,北京,100083;中国矿业大学(北京)力学与建筑工程学院,北京,100083;中国矿业大学(北京)力学与建筑工程学院,北京,100083;中国矿业大学(北京)力学与建筑工程学院,北京,100083;中国矿业大学(北京)力学与建筑工程学院,北京,100083 |
| |
| 基金项目： | 国家自然科学基金项目(51374212) |
| |
| 摘 要： | 针对含预制裂纹L形梁柱试件，为研究预制裂纹动态扩展的力学特征及其对梁柱试件破坏模式的影响，采用数字动态焦散线实验系统，对距节点核心区不同距离l处含有预制裂纹的试件进行落锤冲击实验，得到预制裂纹的扩展轨迹、速度、动态应力强度因子的变化规律。结果表明，l值增大，扩展裂纹在梁下边缘的贯通点与预制裂纹的夹角逐渐增大，曲裂程度变大。裂纹扩展速度随着l的增大振荡性增强，裂纹扩展平均速度逐渐降低。l值为2 mm时，裂尖表现为Ⅰ型断裂，l值增大，裂尖受到剪应力作用增强，Ⅰ型动态应力强度因子减小，Ⅱ型动态应力强度因子增大，断裂逐渐转变为Ⅰ-Ⅱ复合型。
|
| 关 键 词： | 梁柱试件 冲击 焦散线 动态断裂 预制裂纹 应力强度因子 |
| 收稿时间： | 2017-07-07 |
Dynamic fracture processes of L-shaped beam-column specimens with prefabricated cracks |
| |
| LI Qing,XUE Yaodong,YU Qiang,XU Wenlong,WEI Guihua. Dynamic fracture processes of L-shaped beam-column specimens with prefabricated cracks[J]. Explosion and Shock Waves, 2018, 38(3): 491-500. DOI: 10.11883/bzycj-2017-0255 |
| |
| Authors: | LI Qing XUE Yaodong YU Qiang XU Wenlong WEI Guihua |
| |
| Affiliation: | School of Mechanics and Architecture Engineering, China University of Mining and Technology, Beijing 100083, China |
| |
| Abstract: | The dynamic propagation mechanics of prefabricated crack and its effect on joint were studied for the impact fracture process of L-shaped beam-column specimens with prefabricated cracks.The drop testing was carried out on the specimens with cracks at different distances l far from node core area by using the digital dynamic caustic system and the variations of crack propagation trajectory,velocity and dynamic stress-intensity factor were obtained.The results show that the increase of l leads to the angle between the penetration point of the extended crack at the edge of the beam and the prefabricated crack increases gradually and the degree of crack curving becomes larger.With the increase of l,the oscillation of crack propagation velocity increases,the average velocity decreases and the crack propagation time is gradually prolonged.When the value of l is 2 mm,the fracture pattern is mode Ⅰ.Asthe value of l increases,the crack tip is increased by the shear stress,the dynamic stress intensity factor of mode Ⅰ decreases and the dynamic stress intensity factor of mode Ⅱ gradually increases.The fracture pattern gradually becomes Ⅰ-Ⅱ complex mode. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《爆炸与冲击》浏览原始摘要信息 |
|
点击此处可从《爆炸与冲击》下载全文 |
|
