二氰胺钴、镍调控钒酸铋界面载流子传输及光催化产氧研究（英文）

光催化水分解反应是解决当前世界范围严峻的能源与环境问题的一种有效途径.光催化分解水过程可以分为产氢和产氧两个半反应.产氧反应过程复杂,动力学缓慢,是光催化分解水的限速步骤,因此需要探索性能优异的水氧化催化剂(WOCs)来提高产氧半反应的效率.钒酸铋近年来被广泛研究并应用于光催化产氧领域.钒酸铋拥有合适的带宽(2.4 eV)以及较好的稳定性,但是其应用受到其严重的电子空穴复合率、较低的电荷传输能力以及较差的反应动力学的限制.以往研究表明,通过构建复合光催化体系可以有效促进光生电荷的分离与传输,提高材料的光催化性能.因此,我们提出构建新型的BiVO_4/M(dca)_2(M=Co,Ni)复合体系,其中,BiVO_4作为光敏化剂,M(dca)_2作为水氧化催化剂.红外测试和紫外可见测试的结果表明,M(dca)_2通过物理吸附的方式附着在BiVO_4表面,形成BiVO_4/M(dca)_2复合光催化剂体系.复合体系的产氧活性相较于纯BiVO_4有明显的提升.光催化产氧测试结果表明,BiVO_4/Co(dca)2和BiVO_4/Ni(dca)_2复合体系的产氧活性分别可达508.1和297.7μmol/(h·g),而纯BiVO_4的产氧活性只有252.2μmol/(h·g).进一步的稳定性测试结果表明,BiVO_4/Co(dca)2复合体系在30 h的测试过程中能够保持稳定的活性.ICP-MS和XPS的表征结果证明了催化过程中分子催化剂良好的稳定性,排除了反应过程中生成氧化物进而促进产氧活性的可能.对该复合体系的一系列电化学表征证明,M(dca)_2有效改善了BiVO_4/电解液界面的电荷传输性能,从而促进了光催化产氧性能.其中,莫特-肖特基测试表明,M(dca)_2的加入增大了能带弯曲,提高了空穴传递的驱动力,阻抗谱的测试证明了复合体系具有较低的界面电阻,有利于载流子的迁移.通过对复合体系光生载流子分离和注入效率的表征,可以证明,在BiVO_4/M(dca)_2复合体系中,光生空穴能够有效地从BiVO_4迁移到M(dca)_2,进而参与光催化产氧反应并且光催化活性有明显的提升.其中,由于Co(dca)2能够更加有效地改善BiVO_4/电解质的水氧化反应动力学过程,其活性显著优于BiVO_4/Ni(dca)_2体系和纯BiVO_4.此外,基于实验结果和各项表征,我们进一步提出了BiVO_4/Co(dca)2光催化产氧反应的反应机理:光照条件下,BiVO_4中电子跃迁至导带,进而被牺牲剂消耗,而价带上的空穴则传递至分子催化剂进行化学反应,其中,分子催化的反应机理遵循水亲核攻击的模型.

Photocatalytic water oxidation over BiVO4 with interface energetics engineered by Co and Ni-metallated dicyanamides

Photocatalytic water oxidation based on semiconductors usually suffers from poor charge transfer from the bulk to the interface, which is necessary for oxygen generation. Here, we construct a hy-brid artificial photosynthesis system for photocatalytic water oxidation. The system consists of BiVO4as the light harvester, a transitional metal complex (M(dca)2, M = Co, Ni, dca: dicyanamide) as the water oxidation catalyst, and S2O82- as a sacrificial electron acceptor. The system exhibits en-hanced oxygen evolution activity when M(dca)2 is introduced. The BiVO4/Co(dca)2 and Bi-VO4/Ni(dca)2 systems exhibit excellent oxygen evolution rates of 508.1 and 297.7 μmol/(h·g) com-pared to the pure BiVO4 which shows a photocatalytic oxygen evolution rate of 252.2 μmol/(h·g) during 6 h of photocatalytic reaction. Co(dca)2 is found to be more effective than Ni(dca)2as a water oxidation catalyst. The enhanced photocatalytic performance is ascribed to the M(dca)2- engineered BiVO4/electrolyte interface energetics, and to the M(dca)2- catalyzed surface water oxidation. These two factors lead to a decrease in the energy barrier for hole transfer from the bulk to the surface of BiVO4, which promotes the water oxidation kinetics.