有序介孔TiO2纳米纤维及其串联光催化水处理-产氢性能（英文）

光催化技术在环境净化及新能源开发方面具有巨大的研究潜力,特别在有机污染物降解去除和分解水制氢展示出了广泛的应用前景.二氧化钛(TiO2)具有出色的光催化活性和稳定性、低成本和无毒性等性质,是最有前景的光催化剂之一,但离广泛实用还有一定距离.TiO2光催化活性很大程度上取决于其尺寸,结晶度和形状等结构特征,因此,TiO2的纳米结构优化设计,为开发高活性TiO2光催化材料,推动其商业和工业应用提供了新的可能.最近大量研究表明,一维(1D)纳米结构,如纳米管,纳米线和纳米纤维等,具有卓越的光生电荷分离和传输能力,可提高光催化活性.鉴于此,1D TiO2纳米光催化剂的设计和可控制备引起了广泛的研究关注.一般而言,1D TiO2制备方法包括溶胶凝胶法,水热法,溶剂热法和静电纺丝法.其中,水热法由于简单高效,是最广泛使用的一种制备方法.通常,水热法制备1D TiO2包括两个主要步骤.首先,在浓NaOH水溶液中的水热处理,将不规则的TiO2颗粒转化为均匀的1D纳米钛酸盐中间体.随后,通过氢离子交换和热转化,将所获得的钛酸盐转化为1D TiO2.钛酸盐中间体的形成和转化过程,对调控所得1D TiO2产物的结构特征,包括相、尺寸、形状和组成等,具有至关重要的作用.然而,传统水热法的反应条件非常苛刻,经常导致1D纳米结构的破坏及纳米颗粒的无序排列,降低了获得材料的光催化活性.因此,发展温和的钛酸盐转化方法,将为制备高活性光催化材料提供新思路.本文通过新颖的蒸汽热方法,成功将钛酸盐纳米带转化为由纳米晶定向组装而成的介孔TiO2纳米纤维.结合XRD,BET,TEM,XPS,UV-Vis和PL等分析手段详细表征了催化剂的组成与结构,基于有机污染物(以罗丹明B为例)降解以及光催化分解水制氢考察了催化剂的光催化活性.结果表明,在150°C蒸汽热处理得到的1D TiO2纳米纤维具有最高的光催化氧化活性与还原活性,均优于商业TiO2(P25).1D TiO2纳米纤维具有介孔结构,其纳米晶排列有序,从而对增强光催化性能至关重要.各向异性锐钛矿纳米晶的有序排列,促进了光生电子与空穴沿纳米纤维结构定向传递,降低电子-空穴复合几率.介孔结构和高表面积有利于光催化反应过程中的质量交换.鉴于1D TiO2纳米纤维同时具有最高的光催化氧化活性与还原活性,我们发展了光催化水处理-产氢集成新技术,通过光催化“有氧氧化-缺氧还原”串联工艺来实现.有机染料在有氧氧化过程中部分氧化,并在后续的缺氧还原阶段充当高效牺牲试剂以促进光催化分解水制氢.该研究为制备高活性有序介孔TiO2纳米纤维及其应用提供了新思路.

Hydrogen producing water treatment through mesoporous TiO2 nanofibers with oriented nanocrystals

The development of well-defined TiO2 nanoarchitectures is a versatile strategy to achieve high-efficiency photocatalytic performance.In this study,mesoporous TiO2 nanofibers consisting of oriented nanocrystals were fabricated by a facile vapothermal-assisted topochemical transformation of preformed H-titanate nanobelts.The vapothermal temperature is crucial in tuning the microstructures and photocatalytic redox properties of the resulting mesoporous TiO2 nanofibers.The microstructures were characterized with XRD,TEM,XPS and nitrogen adsorption-desorption isotherms,etc.The photocatalytic activities were evaluated by photocatalytic oxidation of organic pollutant(Rhodamine B as an example)as well as photocatalytic reduction of water to generate hydrogen(H2).The nanofibers vapothermally treated at 150°C showed the highest photocatalytic activity in both oxidation and reduction reactions,2 times higher than that of P25.The oriented alignment and suitable mesoporosity in the resulting nanofiber architecture were crucial for enhancing photocatalytic performances.The oriented alignment of anisotropic anatase nanocrystals shall facilitate faster vectorial charge transportation along the nanofibers architecture.And,the suitable mesoporosity and high surface area would also effectively enhance the mass exchange during photocatalytic reactions.We also demonstrate that efficient energy-recovering photocatalytic water treatments could be accomplished by a cascading oxic-anoxic process where the dye is degraded in the oxic phase and hydrogen is generated in the successive anoxic phase.This study showcases a novel and facile method to fabricate mesoporous TiO2 nanofibers with high photocatalytic activity for both clean energy production and environmental purification.