Pressurized Liquid Extraction Combined with Dispersive Liquid‐liquid Micro‐extraction as an Efficient Sample Preparation Method for Determination of Volatile Components in Tobacco |
| |
Authors: | Xiaolan Zhu Yingbo Xu Yun Gao Lan Huang |
| |
Institution: | 1. Research Center of Tobacco and Health, University of Science and Technology of China, Hefei 230052, P. R. China;2. Center of Technology, China Tobacco Anhui Industrial Corporation, Hefei, 230088, P. R. China |
| |
Abstract: | The pressurized liquid extraction (PLE) followed by dispersive liquid–liquid micro‐extraction (DLLME) has been developed for extraction of volatile components in tobacco. 35 volatile components were detected by gas chromatography mass spectrometry (GC‐MS). Methanol–methyl tert‐butyl ether (MTBE) (8:2, v/v) was selected as PLE extraction solvent. The optimized DLLME procedure, 3 mL of pure water and 1.0 mL tobacco extract solution, 40 μL of chloroform as extraction solvent, 0.5 mL of acetonitrile as disperser solvent, was validated. Under the optimum conditions, the enrichment factors were in the range of 96‐159. The limits of detection were between 0.14 and 0.33 μg/kg. The repeatability of the proposed method, expressed as relative standard deviation, varied between 4.3 and 7.5% (n = 6). The recoveries of the analytes evaluated by fortification of tobacco samples were in the range of 84.7‐96.4%. Compared with the conventional sample preparation method for determination of volatile components in tobacco, the proposed method was quick and easy to operate, and had high‐enrichment factors and low consumption of organic solvent. |
| |
Keywords: | DLLME PLE Volatile components Tobacco |
|
|