Determination of the micropore volume distribution function of activated carbons by gas adsorption

A new method for the determination of the micropore volume distribution function of activated carbons is presented. It is based on the treatment of pure gas adsorption isotherms by a theoretical model derived from the Hill-de Boer theory. Adsorption data (isotherms and heat curves) for carbon dioxide, ethane and ethylene on activated carbon (F30/470 CHEMVIRON CARBON) have been provided by a thermobalance coupled to a calorimeter (TG-DSC 111 SETARAM) at different temperatures (233, 273, 303 and 323 K) for pressures up to 100 kPa. Adsorption isotherms of carbon dioxide and ethane at 303 and 323 K have been used for the determination of the micropore volume distribution function of the activated carbon of interest. The knowledge of its structure has then allowed the simulation of adsorption isotherms and heats for the same adsorbates at the same temperatures as those experimentally studied. Similar calculations have been conducted for ethylene. Whatever the adsorbate (carbon dioxide and ethane used for the determination of the micropore volume distribution function or ethylene), the mean deviation between experimental and calculated isotherms does not exceed 4% at quasicritical and supercritical temperatures (303 and 323 K). In the same temperature conditions, discrepancies between calculation and experiment reach about 10% for adsorption heats. For both isotherms and heats, large discrepancies appear at low temperature (233 and 273 K). This method allows the determination of the micropore volume distribution function of activated carbons. The validity of the results is insured using several isotherms of several adsorbates and taking into account the calorimetric effect of the phenomenon. That is the reason why this method can also be seen as a new possible model for pure gas adsorption data prediction. This paper also presents a brief summary of the state of the art in this field.