| 辉光放电发射光谱法测定硅钢薄板中微量硼元素 |
| |
| 引用本文： | 邓军华,曹新全,李 化.辉光放电发射光谱法测定硅钢薄板中微量硼元素[J].中国无机分析化学,2011,1(3):39-42. |
| |
| 作者姓名： | 邓军华 曹新全 李 化 |
| |
| 作者单位： | 鞍钢股份有限公司技术中心，辽宁 鞍山 114001;鞍钢股份有限公司质检中心， 辽宁 鞍山 114009;鞍钢股份有限公司质检中心， 辽宁 鞍山 114009 |
| |
| 摘 要： | 通过对辉光放电发射光谱参数的优化,以铁元素为内标来消除基体效应,建立了测定硅钢薄板中微量硼元素的方法.优化的实验参数为:放电电压1200V,放电电流50 mA,预溅射时间40 s,积分时间1o s.校准曲线硼元素含量范围0.0001％～0.022％,相关系数大于0.999,测量结果与认定值一致,相对标准偏差小于10％....
|
| 关 键 词： | 辉光放电光谱法 硼 硅钢薄板 |
| 收稿时间： | 2011/5/19 0:00:00 |
| 修稿时间： | 2011/6/28 0:00:00 |
Determination of Trace Boron Element in Silicon Steel Sheets by Glow Discharge Optical Emission Spectrometry (GD-OES) |
| |
| DENG Junhu,CAO Xinquan and LI Hua.Determination of Trace Boron Element in Silicon Steel Sheets by Glow Discharge Optical Emission Spectrometry (GD-OES)[J].Chinese Journal of Inorganic Analytical Chemistry,2011,1(3):39-42. |
| |
| Authors: | DENG Junhu CAO Xinquan and LI Hua |
| |
| Abstract: | A glow discharge optical emission spectrometry (GD-OES)
method for determining trace boron element in silicon steel sheets were established through optimization of instrumental parameters and using Fe element as an internal standard to eliminate the matrix effect. The optimized instrumental parameters included discharge voltage, discharge current, pre-sputtering time and integration time, which are 1200 V, 50 mA, 40 s, and 10 s, respectively. The content of boron element that can be determined from the calibration curve ranges from 0.0001% to 0.022% and the linear correlation coefficient is more than 0.999. The testing results are consistent with the certified values and the relative standard deviations are below 10%. |
| |
| Keywords: | |
|
| 点击此处可从《中国无机分析化学》浏览原始摘要信息 |
| 点击此处可从《中国无机分析化学》下载免费的PDF全文 |
|
