首页 | 本学科首页   官方微博 | 高级检索  
     检索      

工业固定床Fe-Cu-K催化剂浆态床F-T合成适应性研究
引用本文:白亮,刘利军,李小蓓,张志新,相宏伟,李永旺,韩怡卓.工业固定床Fe-Cu-K催化剂浆态床F-T合成适应性研究[J].燃料化学学报,2005,33(2):211-217.
作者姓名:白亮  刘利军  李小蓓  张志新  相宏伟  李永旺  韩怡卓
作者单位:State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China; Graduate school of the Chinese academic of science, Beijing 100039, China
基金项目:国家自然科学基金 ( 20590361 ),国家高技术研究发展计划 ( 863项目,2001AA523010 ),中国科学院知识创新重大工程项目(KGCX1-SW-02)。~~
摘    要:采用连续搅拌釜式反应器,在接近F-T合成实际工况下考察了工业固定床Fe-Cu-K催化剂浆态床F-T合成反应性能,研究反应温度、压力、原料气空速和氢碳摩尔比等操作参数对催化剂反应活性、产物选择性和稳定性的影响,实验总运转时间达2 500 h;同时采用扫描电镜技术(SEM)对催化剂的抗磨损性能进行了研究,结果表明,操作参数对催化剂的活性、选择性和目标产物产率有较大的影响,工业固定床Fe-Cu-K催化剂具有一定的抗磨损性能,F-T合成烃产物分布合理;催化剂具有较高的稳定性,在589 h的稳定条件运行内,催化剂的失活速率为0.23%/d(以CO转化率的降低计);在整个运行期间CH4选择性维持在较低的水平。

关 键 词:浆态床F-T合成  Fe-Cu-K催化剂  烃产物分布  
文章编号:0253-2409(2005)02-0211-07
收稿时间:2004-06-08
修稿时间:2004年6月8日

Investigation on the adaptability of an industrial fixed-bed Fe-Cu-K catalyst to slurry reactor
BAI Liang,LIU Li-jun,LI Xiao-bei,ZHANG Zhi-xin,XIANG Hong-wei,LI Yong-wang,HAN Yi-zhuo.Investigation on the adaptability of an industrial fixed-bed Fe-Cu-K catalyst to slurry reactor[J].Journal of Fuel Chemistry and Technology,2005,33(2):211-217.
Authors:BAI Liang  LIU Li-jun  LI Xiao-bei  ZHANG Zhi-xin  XIANG Hong-wei  LI Yong-wang  HAN Yi-zhuo
Abstract:Fundamental study of the reaction performance and stability of an industrial fixed-bed Fe-Cu-K catalyst was carried out by using a continuous stirred tank reactor (CSTR) equipped with a wax removal system under industrial relevant conditions: 255℃~290℃, 1.5MPa~3.1MPa total pressure, H2/CO (mol ratio)=0.50~1.52 and a space velocity of 1.0L /gcat·h-1~2.5L /gcat·h-1 (unreduced catalyst base) . The effects of reaction conditions on the catalyst activity, product selectivity and stability were investigated. The Scanning electron microscope (SEM) was used to investigate the catalyst attrition resistance. A 2 500 h slurry phase reaction result indicated that the changes of the process conditions (temperature, pressure, H2/CO feed ration and space velocity) had strong effects on the productivity and product selectivity. The effects of the adjustment of reaction pressure on the catalyst stability were particular obvious. The deactivation rates of the catalyst decreased with the changes of conditions in the following order: reaction pressure > space velocity > H2/CO feed ratios. The catalyst activity could be enhanced with the reaction temperature increasing, but the selectivity to heavy hydrocarbons was decreased. The increase of the reaction pressure could promote the conversion, and improve the heavy hydrocarbons selectivity and the hydrocarbon productivity. Increasing space velocity in feed gas could increase hydrocarbon productivity, and evidently decline the CO conversion and the selectivity of the heavy hydrocarbons. The increase of the H2/CO feed ratio could raise CO conversion and improve the selectivity of heavy hydrocarbons. The appropriate choice of the F-T reaction parameters in slurry phase could obtain the balance among catalyst activity, hydrocarbon distribution and productivity. The SEM results indicated that the catalyst exhibited robust attrition resistance.
Keywords:slurry phase Fischer-Tropsch synthesis  Fe-Cu-K catalyst  catalytic performance  hydrocarbon distribution
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《燃料化学学报》浏览原始摘要信息
点击此处可从《燃料化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号