首页 | 本学科首页   官方微博 | 高级检索  
     检索      

不同结晶状态的聚丙烯材料的声发射研究
引用本文:徐涛,雷华,于杰,谢长生.不同结晶状态的聚丙烯材料的声发射研究[J].高等学校化学学报,2001,22(10):1757-1760.
作者姓名:徐涛  雷华  于杰  谢长生
作者单位:1. 华中科技大学材料学院,
2. 贵州工业大学,
基金项目:贵州省省长资金 (批准号 :2 0 0 1-0 3),贵州工业大学学校基金 (批准号 :99-312 )资助
摘    要:用MISTRAS2001声发射监测系统对加入一定量成核剂(0-2.0%)的聚丙烯材料进行冲击过程声发射研究,研究记录了冲击过程的应力-时间曲线。结果表明,在成核剂加入量为0.4%时,冲击强度出现极大值,与之相对应,其声发射信号最为丰富,声发射振铃计数最高,裂纹扩展阶段的声发射信号占主导地位,随成核剂含量增大,材料冲击断裂过程中裂纹萌生阶段AE计数呈上升趋势,而裂纹扩展阶段的AE计数呈先上升后下降的趋势,同时裂纹萌生功和裂纹扩展功也呈现相同的变化趋势,与断面特征区特征参量的变化相对应。

关 键 词:聚丙烯  冲击实验  声发射  力学性能  结晶状态  冲击断裂
文章编号:0251-0790(2001)10-1757-04

The Research of Acoustic Emission with Different Crystalline Morphology of Polypropylene
XU Tao\\{\},LEI Hua\,YU Jie\,XIE Chang\|Sheng\.The Research of Acoustic Emission with Different Crystalline Morphology of Polypropylene[J].Chemical Research In Chinese Universities,2001,22(10):1757-1760.
Authors:XU Tao\\{\}  LEI Hua\  YU Jie\  XIE Chang\|Sheng\
Institution:XU Tao\+\{1*\},LEI Hua\+2,YU Jie\+2,XIE Chang\|Sheng\+1
Abstract:The Acoustic Emission within the process of instrumented impact test was researched with polypropylene materials filled with nucleating agent(mass fraction, 0\_2\^0%) by the MISTRAS2001 AE SYSTEM. It was shown that at the 0.4%(mass fraction) content of nucleating agent, the notched impact strength showed a maximum value, at the same time, the AE counts also reached the highest level. With the increase of nucleating agent, AE counts of crack initiating stage in the process of impact fracture tend toward the increase, but the AE counts of crack growth stage reaches a maximum value. It has the same transformation tendency with the characteristic parameter of fracture surface.
Keywords:Polypropylene  Instrumented impact test  Acoustic emission
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号