| 用微接触印刷法诱导生长聚合物微结构 |
| |
| 引用本文： | 金邦坤,何平笙.用微接触印刷法诱导生长聚合物微结构[J].功能高分子学报,2004,17(4):603-606. |
| |
| 作者姓名： | 金邦坤 何平笙 |
| |
| 作者单位： | 中国科学技术大学,高分子科学与工程系,安徽省,合肥,230026 |
| |
| 基金项目： | 国家自然科学基金资助项目(20174038) |
| |
| 摘 要： | 用十八烷基三氯硅烷(OTS)／正己烷溶液为印墨在玻璃基片上进行微接触印刷,得到图案化的自组装层,然后以此对聚苯乙烯溶液进行诱导分布,并在苯胺溶液中对其进行诱导聚合反应生长出聚苯胺微图形。直接用聚合物溶液作为印墨制作了环氧树脂微条纹和聚苯乙烯两层交叉微结构。
|
| 关 键 词： | 三氯硅烷 聚苯乙烯 聚合反应 溶液 环氧树脂 聚合物 聚苯胺 微结构 自组装 微接触印刷 |
| 文章编号： | 1008-9357(2004)04-0603-04 |
| 修稿时间： | 2004年6月20日 |
Polymeric Microstructures Grown from Micropatterns by Microcontact Printing |
| |
| JIN Bang-kun,HE Ping-sheng.Polymeric Microstructures Grown from Micropatterns by Microcontact Printing[J].Journal of Functional Polymers,2004,17(4):603-606. |
| |
| Authors: | JIN Bang-kun HE Ping-sheng |
| |
| Abstract: | By processing microcontact printing on glass slides with octadecyl-trichlorosilane (OTS) / n -hexane solution as "ink", patterned self-assembly layer of OTS was obtained. Polymeric microstructures can be made by induced distribution of polymer solutions on this patterned layer. By putting the OTS layer in acidic polymerization solution of aniline, microstructures of polyaniline were grown on the hydrophilic area of the glass slide. Also the effect of reaction time was observed. Microlines of epoxy E51 and bilayer microstructure of polystyrene were made by producing microcontact printing directly using their corresponding polymer solutions as inks. |
| |
| Keywords: | microcontact printing polystyrene polyaniline poly (dimethylsiloxane) |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
