首页 | 本学科首页   官方微博 | 高级检索  
     检索      

多壁碳纳米管/聚醚胺复合物的制备
引用本文:任艳蓉,房晓敏,徐元清,丁涛.多壁碳纳米管/聚醚胺复合物的制备[J].化学研究,2012,23(3):38-41.
作者姓名:任艳蓉  房晓敏  徐元清  丁涛
作者单位:河南大学化学化工学院,河南开封,475004
基金项目:河南省基础与前沿研究资助项目(112300410076).
摘    要:利用亲核加成逐步聚合法成功地制备了芘标记的聚醚胺(pePEA),并将其用于修饰多壁碳纳米管;采用透射电镜分析了pePEA修饰多壁碳纳米管的微观结构,并利用热重分析测定了聚醚胺的负载量.结果表明:聚醚胺对多壁碳纳米管具有较好的包覆作用,包覆层厚度约为1nm,复合物中聚醚胺的质量分数为20.4%.与此同时,多壁碳纳米管/聚醚胺复合物可在水中稳定地分散,分散液放置3周不分层,无聚集现象发生,稳定性较好.

关 键 词:多壁碳纳米管  聚醚胺  复合物  制备

Preparation of multi-walled carbon nanotubes/poly (ether amine) composite
REN Yan-rong , FANG Xiao-min , XU Yuan-qing , DING Tao.Preparation of multi-walled carbon nanotubes/poly (ether amine) composite[J].Chemical Research,2012,23(3):38-41.
Authors:REN Yan-rong  FANG Xiao-min  XU Yuan-qing  DING Tao
Institution:(College of Chemistry and Chemical Engineering, Henan University, Kai feng 475004, Henan, China)
Abstract:Pyrene labeled poly(ether amine), pePEA in short, was synthesized via step-by-step nucleophilic addition polymerization. Resultant polymer was used to modify multi-walled carbon nanotube (MWNT) via non-covalent functionalization. The microstrueture of as-prepared MWNT/pePEA composite was analyzed using a transmission electron microscope, and the content of pePEA in the composite was determined by thermogravimetric analysis. It has been found that pePEA is able to well enwrap MWNT forming an enwrapping layer of 1 nm thick, while the content of pePEA in the composite is 20.4% (mass fraction). In the meantime, asprepared MWNT/pePEA composite can be well dispersed in water, and its aqueous dispersion is free of segregation and agglomeration after three week of storage, showing good stability.
Keywords:multi-walled carbon nanotube  poly(ether amine)  composite  preparation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号