首页 | 本学科首页   官方微博 | 高级检索  
     检索      

不同聚合度聚乙二醇对A30碳钢的缓蚀性能
引用本文:陈丽,张冰如,李风亭.不同聚合度聚乙二醇对A30碳钢的缓蚀性能[J].化学研究,2008,19(1):90-94.
作者姓名:陈丽  张冰如  李风亭
作者单位:同济大学,环境科学与工程学院,污染控制与资源化研究国家重点实验室,上海,200092
摘    要:通过开路电位测量法、动电位极化曲线法和电化学阻抗谱法研究了表面活性剂聚乙二醇对A30碳钢的缓蚀作用,初步推测了其缓蚀机理.分别选取聚合度为600、2000、4000、6000的四种聚乙二醇进行实验,结果表明,聚乙二醇对碳钢的最高缓蚀率接近90%.聚乙二醇分子量对缓蚀作用有明显影响,相同浓度时聚合度越大,缓蚀性能越强.三种方法得到的结果具有同一性.

关 键 词:聚乙二醇  聚合度  开路电位  极化曲线  电化学阻抗谱
文章编号:1008-1011(2008)01-0090-05
收稿时间:2007-08-25
修稿时间:2007年8月25日

Corrosion Inhibition of Polyethylene Glycols of Different Molecular Weight on Carbon Steel
CHEN Li,ZHANG Bing-ru,LI Feng-ting.Corrosion Inhibition of Polyethylene Glycols of Different Molecular Weight on Carbon Steel[J].Chemical Research,2008,19(1):90-94.
Authors:CHEN Li  ZHANG Bing-ru  LI Feng-ting
Institution:( State Key Laboratory of Pollution Control and Resource Retake, College of Environmental Science & Engincering, Tongji University, Shanghai 200092. China)
Abstract:The corrosion inhibition effect of polyethylene glycols (PEGs) on carbon steel was evaluated by(corrosion potential) OCP,dynamic potential polarization and electrochemical impedance spectroscopy(EIS) techniques.Different molecular weights(600,2 000,4 000,and 6 000) of PEGs were selected to compare their inhibition efficiency.Results showed that PEGs do have inhibition efficiencies on carbon steel and the best inhibition efficiency is up to around 90 %.The inhibition efficiencies are increased by increase of the PEGs' concentration and molecular weight.Results obtained from the three techniques are in good agreements.
Keywords:polyethylene glycols  molecular weight  open circuit potential  polarization curve  electrochemical impedance spectroscopy
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号