首页 | 本学科首页   官方微博 | 高级检索  
     检索      

原位交联杂化型聚合物电解质膜的形成机理、结构模型及其电化学性能
引用本文:梁桂杰,钟志成,许杰,徐卫林,陈美华,张增常,李文联.原位交联杂化型聚合物电解质膜的形成机理、结构模型及其电化学性能[J].物理化学学报,2012,28(9):2057-2064.
作者姓名:梁桂杰  钟志成  许杰  徐卫林  陈美华  张增常  李文联
作者单位:1. Research Center for Materials Science & Engineering, Hubei University of Arts and Science, Xiangyang 441053, Hubei Province, P. R. China; 2. State Key Laboratory for Mechanical Behavior of Materials, Xi'an JiaoTong University, Xi'an 710049, P. R. China; 3. Key Laboratory of Green Processing and Functional Textiles of New Textile Materials, Ministry of Education, Wuhan Textile University, Wuhan 430073, P. R. China
基金项目:国家自然科学基金 (51003082),教育部科学技术研究重点项目(208089)和湖北省自然科学基金 (2011CDC062) 资助项目
摘    要:合成含有Ti(Ⅵ)杂化中心的交联(柠檬酸钛络合体-聚乙二醇)聚酯网络作为基体,水解生成的Nano-TiO2粒子为填料,LiI/I2为导电离子,通过原位聚合复合法制备了Nano-TiO2/(柠檬酸钛络合体-聚乙二醇)/LiI/I2交联杂化型聚合物电解质膜。采用局域密度近似(LDA)法、Raman光谱、傅里叶变换红外光谱(FTIR)、透射电子显微镜(TEM)和能量散射X射线分析(EDXA)探讨了交联杂化聚合物基体的形成机理,并建立了其相应的结构模型。在此基础之上,研究了四异丙氧基钛(Ti(iOPr)4)的含量对Nano-TiO2/(柠檬酸钛络合体-聚乙二醇)/LiI/I2电解质膜的结构及电化学性能的影响。研究表明:当Ti(iOPr)4含量高于12 % (w)时,Nano-TiO2粒子和Ti(Ⅵ)杂化中心的共同作用不仅有效提高了电解质膜的离子电导率(σ),而且显著改善了电解质膜与电极间的界面稳定性;Ti(iOPr)4含量为48 % (w)时,电解质膜的室温离子电导率达到最大值9.72×10-5 S·cm-1,电解质膜的界面电阻于6d后趋于稳定。

关 键 词:聚合物电解质  染料敏化太阳能电池  四异丙氧基钛  离子电导率  界面稳定性  
收稿时间:2012-03-30
修稿时间:2012-05-25

Formation Mechanism,Structure Model and Electrochemical Performance of an In situ Cross Linking Hybrid Polymer Electrolyte Membrane
LIANG Gui-Jie,ZHONG Zhi-Cheng,XU Jie,XU Wei-Lin,CHEN Mei-Hua,ZHANG Zeng-Chang,LI Wen-Lian.Formation Mechanism,Structure Model and Electrochemical Performance of an In situ Cross Linking Hybrid Polymer Electrolyte Membrane[J].Acta Physico-Chimica Sinica,2012,28(9):2057-2064.
Authors:LIANG Gui-Jie  ZHONG Zhi-Cheng  XU Jie  XU Wei-Lin  CHEN Mei-Hua  ZHANG Zeng-Chang  LI Wen-Lian
Institution:1. Research Center for Materials Science & Engineering, Hubei University of Arts and Science, Xiangyang 441053, Hubei Province, P. R. China; 2. State Key Laboratory for Mechanical Behavior of Materials, Xi'an JiaoTong University, Xi'an 710049, P. R. China; 3. Key Laboratory of Green Processing and Functional Textiles of New Textile Materials, Ministry of Education, Wuhan Textile University, Wuhan 430073, P. R. China
Abstract:A Nano-TiO2/poly(citric acid titanium complex-polyethylene glycol)/LiI/I2 crosslinked hybrid polymer electrolyte membrane has been prepared via in-situ polymerization and compositing. Specifically, the method used the synthesized crosslinked network of poly(citric acid titanium complex-polyethylene glycol) containing the Ti(VI) hybrid center as a substrate, the hydrolyzed Nano-TiO2 as fillers and LiI/I2 as conductive ionics. The formation mechanism of the crosslinked hybrid polymer matrix is discussed. A structural model was established with a local density approximation (LDA) method. The influence of Ti(iOPr)4 content on the structure and electrochemical performance of the electrolyte membrane were investigated with Raman spectra, Fourier transform infrared spectra (FTIR), transmission electron microscopy (TEM), and an energy dispersive X-ray analysis (EDXA) technique. It was found that when the Ti(iOPr)4 content was higher than 12% (w), the combined action of Nano-TiO2 particles and the Ti(VI) hybrid center improved not only the room-temperature ionic conductivity (σ), but also the interfacial stability. At 48% (w) Ti(iOPr)4 content, the value of σ reached a maximum of 9.72×10-5 S·cm-1 and the interface resistance became stable after 6 d.
Keywords:Polymer electrolyte  Dye-sensitized solar cells  Titanium tetraisopropoxide  Ionic conductivity  Interface stability
本文献已被 万方数据 等数据库收录!
点击此处可从《物理化学学报》浏览原始摘要信息
点击此处可从《物理化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号