首页 | 本学科首页   官方微博 | 高级检索  
     检索      

掺铝氧化锌纳米晶的超声-水热协同控制合成及其光催化性能
引用本文:杨小红,童琴,刘畅,刘金库,贺文智,李光明.掺铝氧化锌纳米晶的超声-水热协同控制合成及其光催化性能[J].物理化学学报,2012,28(11):2713-2720.
作者姓名:杨小红  童琴  刘畅  刘金库  贺文智  李光明
作者单位:1. Department of Chemistry, East China University of Science and Technology, Shanghai 200237, P.R. China; 2. 2Department of Chemistry, Chizhou University, Chizhou 247000, Anhui Province, P.R. China; 3. School of Environmental Science and Engineering, Tongji University, Shanghai 200092, P.R. China
基金项目:国家自然科学基金(21071024);污染控制与资源化研究国家重点实验室开放课题(PCRRF11019)资助~~
摘    要:利用超声和水热的协同控制作用高效合成出了分散好、晶体结构完整、粒径尺寸约为20 nm的掺铝氧化锌(ZAO)纳米晶, 通过透射电子显微镜(TEM)、X射线粉末衍射仪(XRD)、傅里叶变换红外(FTIR)光谱仪、紫外-可见(UV-Vis)分光光度计和热重-差热分析(TG-DTA)手段对产物形貌、结构、光学性质及前驱物的热性质进行了研究, 对其降解罗丹明B (RhB)的光催化效果和光催化降解机理进行了探讨. 由于超声和水热的协同作用, 有效控制了产物的粒径, 提高了产物的结晶度. 产物的紫外-可见光谱吸收峰出现在369 nm左右, 计算其带隙约为3.36 eV. 同超声法或水热法制备的产物相比, 超声-水热法制备的ZAO纳米产物具有更高的光催化活性, 从而使光催化降解时间缩短为原来的77.8%. ZAO纳米光催化剂能够回收再利用.

关 键 词:超声法  水热法  掺铝氧化锌  纳米晶  光催化  
收稿时间:2012-05-17
修稿时间:2012-07-16

Photocatalytic Properties of Aluminum Doped Zinc Oxide Nanocrystals Controlled Prepared via a Synergistic Ultrasonic/Hydrothermal Technique
YANG Xiao-Hong,TONG Qin,LIU Chang,LIU Jin-Ku,HE Wen-Zhi,LI Guang-Ming.Photocatalytic Properties of Aluminum Doped Zinc Oxide Nanocrystals Controlled Prepared via a Synergistic Ultrasonic/Hydrothermal Technique[J].Acta Physico-Chimica Sinica,2012,28(11):2713-2720.
Authors:YANG Xiao-Hong  TONG Qin  LIU Chang  LIU Jin-Ku  HE Wen-Zhi  LI Guang-Ming
Institution:1. Department of Chemistry, East China University of Science and Technology, Shanghai 200237, P.R. China; 2. 2Department of Chemistry, Chizhou University, Chizhou 247000, Anhui Province, P.R. China; 3. School of Environmental Science and Engineering, Tongji University, Shanghai 200092, P.R. China
Abstract:Aluminum doped zinc oxide (ZAO) nanocrystals approximately 20 nm in diameter and with good dispersity and crystallinity were efficiently synthesized through a synergistic combination of ultrasonic and hydrothermal methods. The morphologies, structures, and optical properties of these nanocrystals, as well as the thermochemistry of the precursor, were determined using transmission electron microscopy (TEM), powder X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, and thermogravimetric-differential thermal analysis (TG-DTA). ZAO nanocrystals were investigated with regard to the photocatalysis of rhodamine B (RhB) in solution, including studies of degradation rates and catalysis mechanism. It was found that both the particle size and crystallinity of the material can be controlled through the ultrasonic/hydrothermal synergetic effect. The main absorption peak of the product in a typical UV-Vis spectrum appeared at ~369 nm and its energy band gap was determined to be 3.36 eV. The ZAO produced by this method exhibits enhanced photocatalytic activity; compared to catalysis by materials produced solely by ultrasonic or hydrothermal routes, the degradation time of an RhB solution is reduced by 77.8%. In addition, it was found that this ZAO photocatalyst may be recycled and used more than once.
Keywords:Ultrasonic route  Hydrothermal route  Aluminum doped zinc oxide  Nanocrystal  Photocatalysis
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《物理化学学报》浏览原始摘要信息
点击此处可从《物理化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号