首页 | 本学科首页   官方微博 | 高级检索  
     检索      

PZT铁电薄膜底电极制备工艺的研究
引用本文:江政,杨成韬,霍伟荣,赵鹏.PZT铁电薄膜底电极制备工艺的研究[J].分析测试技术与仪器,2010,16(2):78-82.
作者姓名:江政  杨成韬  霍伟荣  赵鹏
作者单位:电子科技大学,电子薄膜与集成器件国家重点实验室,四川,成都,610054
基金项目:国家重点基础研究发展计划(973)预研项目 
摘    要:利用磁控溅射方法在Si(001)基片上制备Ti/Pt底电极,其厚度大概分别为20、100 nm,其中Ti电极作为缓冲层,随后在上面溅射PZT铁电薄膜.研究了不同电极的制备工艺对电极形貌、取向以及对PZT铁电薄膜的制备带来的影响.结果表明,底电极的溅射温度以及退火温度对于底电极起着至关重要的作用,同时具有良好(111)取向的、致密性较好的底电极对于PZT铁电薄膜的生长具有重要的影响.

关 键 词:磁控溅射  PZT铁电薄膜  底电极  退火
收稿时间:2010/1/22 0:00:00
修稿时间:3/2/2010 12:00:00 AM

Preparation of Bottom Electrode for PZT Ferroelectric Thin Films
JIANG Zheng,Yang Cheng-tao,Huo Wei-rong and ZHAO Peng.Preparation of Bottom Electrode for PZT Ferroelectric Thin Films[J].Analysis and Testing Technology and Instruments,2010,16(2):78-82.
Authors:JIANG Zheng  Yang Cheng-tao  Huo Wei-rong and ZHAO Peng
Institution:(State Key Laboratory of Electronic Thin Films and Integrated Devices,University of Electronic Science and Technology of China,Chengdu 610054,China)
Abstract:Ti/Pt bottom electrodes with thickness of about 20 nm and 100 nm have been synthesized on Si(001)substrates by using a magnetron sputtering method,the Ti electrode is used as the buffer,then PZT thin films are grown on the electrode.The relationship of the preparation technology of Pt/Ti electrode on the structure and property of the film has been discussed.The results show that spurttering temperature and annealing temperature are important to the bottom electrode,and also the compactability of the electrode has key influence on the growth of PZT thin films.
Keywords:magnetron sputtering  PZT  bottom electrode  annealing
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《分析测试技术与仪器》浏览原始摘要信息
点击此处可从《分析测试技术与仪器》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号