Fullerenes as sorbent materials for benzene, toluene, ethylbenzene, and xylene isomers preconcentration

A simple and novel SPE system for benzene, toluene, ethylbenzene, and xylene isomers (BTEX) compounds in water is proposed in which samples are directly propelled from a 15 mL glass vial through a sorbent column by means of a needle, thereby avoiding evaporative losses and the sorption of BTEX on the manifold materials. Following elution with 150 microL of ethyl acetate, 1 microL of extract is injected into a gas chromatograph-mass spectrometer system. A comparative study of various sorbent materials (C60 fullerene, Tenax TA, and RP-C18) revealed C60 fullerene to be the best choice in terms of sensitivity (a likely result of its increased sample breakthrough volume), precision (the surfactant medium used to prepare samples minimizes evaporative losses), selectivity (C60 fullerene only interacts with nonpolar aromatic compounds), and reusability (columns containing 60 mg of C60 fullerene remain serviceable for at least 6 months). This C60 fullerene-based method exhibits a linear range of 0.1-100 microg/L, a detection limit of 0.04 microg/L, and an RSD of ca. 3%. It was applied to the determination of BTEX in various types of water including sea and waste water with good precision.