含氟聚合物修饰碳纳米管及其聚氨酯复合疏水膜的研究

利用羟基碳纳米管上的羟基与2-溴异丁基酰溴之间的简单反应, 在碳纳米管上引入了含溴ATRP引发剂, 并进一步引发含氟丙烯酸酯的ATRP聚合, 从而在碳纳米管表面接枝上了低表面能的含氟聚合物. 红外光谱(FT-IR)、热重分析(TGA)和透射电镜(TEM)的研究结果表明碳纳米管与含氟聚合物之间为化学键连接. 以此低表面能聚合物包裹的碳纳米管作为填充粒子, 采用溶液浇铸方法制备了聚氨酯/碳纳米管复合膜, 并利用溶剂四氢呋喃(THF)刻蚀表面获得了不同碳纳米管裸露程度的复合膜材料. 静态接触角测试结果表明, 无论是羟基碳纳米管还是低表面能修饰的碳纳米管均可提高其复合膜的疏水性能, 且其疏水性能随碳纳米管含量的增加而增加; 相同含量时, 含氟聚合物接枝后的碳纳米管使复合膜具有更佳的疏水性能, 膜表面经溶剂刻蚀后可显著提高其疏水性能. 采用扫描电子显微镜(SEM)研究了加入碳纳米管和溶剂刻蚀对聚合物表面微观结构以及材料表面疏水性能的影响. 上述结果表明: 利用接枝聚合物可改变碳纳米管本身的疏水性能, 并可进一步制备新型的具有表面疏水性能的聚合物纳米复合材料.

Fluorinated Multi-walled Carbon Nanotubes and Fabrication of Polyurethane Composite Films with Hydrophobic Surface

The reaction between the hydroxyl groups on the surface of acid-treated multi-walled carbon nanotubes (MWNT) and 2-bromo-2-methylpropanoyl bromide generates ATRP initiator sites on the MWNT, and then fluorinated acrylates were polymerized from MWNT via a "graft-from" method. Fourier transform infrared spectrometry (FT-IR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) results indicate that the polymer was covalently attached or grafted to the surface of MWNT. Using MWNT coated ...