首页 | 本学科首页   官方微博 | 高级检索  
     检索      

水热法合成纳米氧化铜粉体及其性能表征
引用本文:李冬梅,夏熙.水热法合成纳米氧化铜粉体及其性能表征[J].化学研究与应用,2002,14(4):484-486.
作者姓名:李冬梅  夏熙
作者单位:新疆大学化学化工学院,新疆,乌鲁木齐,830046
基金项目:国家自然科学基金资助项目 (2 9963 0 0 2 )
摘    要:氧化铜粉体广泛用于电极材料1 ] 、玻璃、催化剂 (载体 )等领域。粒子的超细化 ,可以显著的改善氧化铜的应用性能。制备纳米氧化铜的方法有固相合成法2 ] 、沉淀转化法3] 和络合沉淀法4] 。本文采用水热法一步合成了纳米氧化铜粉体 ,所得粉体粒度均匀 ,操作简便 ,易于工业化生产。1 实验部分1 1 样品制备将硝酸铜 (分析纯 ,北京化工二厂 )配成浓度为 1 .0mol·L- 1 的溶液 ,按物质的量比为 2∶1加入浓度为 1 .0mol·L- 1 的尿素 (分析纯 ,上海试剂一厂 )溶液 ,然后在 95℃~ 1 2 5℃下加热溶液进行反应。由于水溶液在 1 0 0…

关 键 词:合成  性能表征  水热法  纳米粉体  氧化铜
文章编号:1004-1656(2002)04-0484-03
修稿时间:2001年7月24日

Preparation of nanophase CuO composite powder by homogeneous method and its electrochemical behavior
LI Dong mei,XIA Xi.Preparation of nanophase CuO composite powder by homogeneous method and its electrochemical behavior[J].Chemical Research and Application,2002,14(4):484-486.
Authors:LI Dong mei  XIA Xi
Abstract:Nanophase CuO powder was prepared with urea and copper nitrate by hydrothermal method.The effects of temperature on yield and particle sizes were studied.The results showed that the yield increased while the particle sizes decreased with the increase of temperature.The sample particles were spherical and the average particle size was between 25 and 60 nm.
Keywords:nanophase powder  cupric oxide  homogeneous method
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号