| Abstract: | A method for determination of Mg, Ti and Cl in Ziegler-Natta (ZN) catalysts by wavelength dispersive X-ray fluorescence (WDXRF) spectrometry was developed. For comparative reasons, Ti was determined by spectrophotometry, Mg by complexometry and Cl by argentometric titration. Direct pressing was shown to be unsuitable for sample preparation due to catalyst decomposition. For Ti and Mg measurements, catalyst samples were calcinated at 1000 °C and pressed at 275 MPa. Their determination by the fundamental parameters based on the Ti Ka line measurement was shown to be equivalent to those results obtained by univariate calibration or by the classical methods. Cl was determined by aqueous extraction, followed by deposition on a support. Chloride loss was observed. Fixation of Cl as AgCl on polytetrafluoroethylene (FHLC) millipore membrane afforded the best results. Nevertheless, measurements by WDXRF were shown to be inferior to those obtained by argentometric titration. |
