首页 | 本学科首页   官方微博 | 高级检索  
     检索      

SILAR法制备化学计量CuInS2薄膜
引用本文:石勇,靳正国,李春艳,安贺松,邱继军.SILAR法制备化学计量CuInS2薄膜[J].无机化学学报,2005,21(9):1286-1290.
作者姓名:石勇  靳正国  李春艳  安贺松  邱继军
作者单位:天津大学材料学院,先进陶瓷与加工技术教育部重点实验室,天津 300072,天津大学材料学院,先进陶瓷与加工技术教育部重点实验室,天津 300072,天津大学材料学院,先进陶瓷与加工技术教育部重点实验室,天津 300072,天津大学材料学院,先进陶瓷与加工技术教育部重点实验室,天津 300072,天津大学材料学院,先进陶瓷与加工技术教育部重点实验室,天津 300072
基金项目:天津市自然科学基金资助项目(No.F103004).
摘    要:在室温下,以不同cCu/cIn的CuCl2和InCl3混合溶液作为阳离子前驱体,Na2S水溶液为硫源,利用连续离子层吸附反应法(SILAR)在玻璃基底上制备了CuInS2薄膜。XRD结果表明,当cCu2+/cIn3+在1~1.5范围内均可形成具有黄铜矿结构的CuInS2薄膜。SEM观察到随cCu2+/cIn3+的升高,薄膜表面颗粒长大并出现团簇聚集。通过XPS测定薄膜表面的化学组成证明当cCu2+/cIn3+=1.25时,CuInS2薄膜接近其标准的化学计量组成。此时薄膜的吸收系数大于>104 cm-1,禁带宽度Eg为1.45 eV。

关 键 词:铜铟硫薄膜    连续离子层吸附反应法    化学计量
文章编号:1001-4861(2005)09-1286-05
收稿时间:2004-12-01
修稿时间:2005-05-10

Preparation of Stoichiometric CuInS2 Thin Films by Successive Ionic Layer Absorption and Reaction (SILAR) Method
SHI Yong,JIN Zheng-Guo,LI Chun-Yan,AN He-Song and QIU Ji-Jun.Preparation of Stoichiometric CuInS2 Thin Films by Successive Ionic Layer Absorption and Reaction (SILAR) Method[J].Chinese Journal of Inorganic Chemistry,2005,21(9):1286-1290.
Authors:SHI Yong  JIN Zheng-Guo  LI Chun-Yan  AN He-Song and QIU Ji-Jun
Institution:Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials, Tianjin University, Tianjin 300072,Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials, Tianjin University, Tianjin 300072,Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials, Tianjin University, Tianjin 300072,Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials, Tianjin University, Tianjin 300072 and Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials, Tianjin University, Tianjin 300072
Abstract:Stoichiometries CuInS2 films were prepared by successive ionic layer absorption and reaction (SILAR) method. The films were deposited on glass substrates using CuCl2 and InCl3 mixing solution with different ionic ratios (cCu/cIn) as cation precursor, and Na2S as the anion precursor. XRD analysis demonstrated that CuInS2 film was chalcopyrite structure when cCu/cIn was 1.25. With the increase of cCu/cIn, the formation of bigger grains and large coherent agglomerates were observed by SEM. XPS results showed that a stoichiometric CuInS2 film could be obtained when cCu/cIn ratio in solution was 1.25, for which the absorption coefficient was > 104 cm-1 and the optical band gap Eg was 1.45 eV.
Keywords:CuInS2 thin films  SILAR method  stoichiometric
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《无机化学学报》浏览原始摘要信息
点击此处可从《无机化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号