| Abstract: | A numerical simulation study was carried out for CdZnTe vertical Bridgman method crystal growth with the accelerated crucible rotation technique (ACRT). The convection, heat and mass transfer in front of the solid‐liquid interface, and their effects on the solute segregation of the grown crystal can be characterized with the following. ACRT brings about a periodic forced convection in the melt, of which the intensity and the incidence are far above the ones of the natural convection without ACRT. This forced convection is of multiformity due to the changes of the ACRT parameters. It can result in the increases of both the solid‐liquid interface concavity and the temperature gradient of the melt in front of the solid‐liquid interface, of which magnitudes vary from a little to many times as the ACRT wave parameters change. It also enhances the mass transfer in the melt in a great deal, almost results in the complete uniformity of the solute distribution in the melt. With suitable wave parameters, ACRT forced convection decreases the radial solute segregation of the crystal in a great deal, even makes it disappear completely. However, it increases both the axial solute segregation and the radial one notably with bad wave parameters. An excellent single crystal could be gotten, of which the most part is with no segregation, by adjusting both the ACRT wave parameters and the crystal growth control parameters, e.g. the initial temperature of the melt, the temperature gradient, and the crucible withdrawal rate. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim) |
