Abstract: | In this work the isoparametric shear spring element is applied to the stress and energy analysis of a center-crack panel reinforced by a rectangular patch. In this model, only transverse shears are assumed to prevail in the adhesive layer. The stresses and crack-tip stress intensity factors are obtained for reinforcement on both sides and one side of the panel, and are found to be in agreement with those obtained by previous authors using the triangular shear spring element.Crack stability that tends to vary with patch thickness is determined from the local and global maximum of the minimum strain energy density function denoted, respectively, as (dW/dV)minmax]L at point L and (dW/dV)minmax]G at point G. The distance l between L and G gives the prospective path of subcritical crack growth and its magnitude provides a measure of the degree of crack stability. A patched panel with small l tends to be more stable than that with large l. By increasing the patch thickness beyond a certain value, l can be contained within the patch such that failure, if initiated, will be highly localized. Such a behavior is exhibited. Numerical results are provided to support the foregoing conclusion. |