| 基于涡粘性模型的翼型湍流流场熵产率计算 |
| |
| 引用本文： | 王威,王军,李佳峻,梁钟.基于涡粘性模型的翼型湍流流场熵产率计算[J].计算力学学报,2018,35(3):387-392. |
| |
| 作者姓名： | 王威 王军 李佳峻 梁钟 |
| |
| 作者单位： | 华中科技大学 能源与动力工程学院, 武汉 430074,华中科技大学 能源与动力工程学院, 武汉 430074,华中科技大学 能源与动力工程学院, 武汉 430074,华中科技大学 能源与动力工程学院, 武汉 430074 |
| |
| 摘 要： | 利用有限体积法实现了基于非正交同位网格的SIMPLE算法。基于熵分析方法，采用涡粘性模型求解湍流熵产方程，系统研究了湍流模型对二维翼型绕流流场熵产率的影响。通过计算NACA0012翼型在来流雷诺数为2.88×106时，0°攻角~16.5°攻角范围内的翼型表面压力系数分布和升阻力特性，验证了算法及程序的正确性。结果表明，选择不同湍流模型时，翼型流场熵产的计算结果存在差异，湍流耗散是引起流场熵产的主要原因；翼型流场的熵产主要发生在翼型前缘区、壁面边界层和翼型尾流区域，流场熵产率与翼型阻力系数线性相关；当产生分离涡时，粘性耗散引起的熵产下降。
|
| 关 键 词： | 熵分析方法 熵产率 翼型 涡粘性模型 同位网格 |
| 收稿时间： | 2017/2/27 0:00:00 |
| 修稿时间： | 2017/5/5 0:00:00 |
Entropy generation rates calculation in turbulent flow through an airfoil based on eddy viscosity models |
| |
| WANG Wei,WANG Jun,LI Jia-jun,LIANG Zhong.Entropy generation rates calculation in turbulent flow through an airfoil based on eddy viscosity models[J].Chinese Journal of Computational Mechanics,2018,35(3):387-392. |
| |
| Authors: | WANG Wei WANG Jun LI Jia-jun LIANG Zhong |
| |
| Institution: | School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China,School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China,School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China and School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China |
| |
| Abstract: | The SIMPLE algorithm was achieved based on non-orthogonal collocated grid by using FVM.Based on entropy analysis method, the influence of turbulence model using eddy viscosity model on the entropy generation rate of the flow field around a two-dimensional airfoil was studied.The accuracy of the algorithm and programs was assessed by simulating the pressure coefficient distribution, lift coefficient and drag coefficient of NACA0012 airfoil under Reynolds number of 2.88×106 and attack angle from 0° to 16.5°.It is found that the entropy generation rate in the airfoil flow field varies with different turbulence models, which is mainly caused by turbulent dissipation.The entropy generation of airfoil flow field mainly occurs in the frontal zone, the wall boundary layer zone and the wake region.The drag coefficient of the airfoil and entropy generation rates in the flow field can be related by linear equation.The entropy generation rates caused by viscous dissipation decrease when the separation vortex appears. |
| |
| Keywords: | entropy analysis method entropy generation rate airfoil eddy viscosity model collocated grid |
|
| 点击此处可从《计算力学学报》浏览原始摘要信息 |
| 点击此处可从《计算力学学报》下载免费的PDF全文 |
|
