Two-dimensional analyses of delamination buckling of symmetrically cross-ply rectangular laminates |
| |
Authors: | Jiang-hong Xue Qing-zi Luo Feng Han Ren-huai Liu |
| |
Institution: | 11694. Department of Mechanics and Civil Engineering, Jinan University, Guangzhou, 510632, P. R. China 21694. Key Lab of Disaster Forecast and Control in Engineering, Ministry of Education, Guangzhou, 510632, P. R. China 31694. State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing, 100081, P. R. China
|
| |
Abstract: | The conventional approach to analysis the buckling of rectangular laminates containing an embedded delamination subjected to the in-plane loading is to simplify the laminate as a beam-plate from which the predicted buckling load decreases as the length of the laminate increases. Two-dimensional analyses are employed in this paper by extending the one-dimensional model to take into consideration of the influence of the delamination width on the buckling performance of the laminates. The laminate is simply supported containing a through width delamination. A new parameter β defined as the ratio of delamination length to delamination width is introduced with an emphasis on the influence of the delamination size. It is found that (i) when the ratio β is greater than one snap-through buckling prevails, the buckling load is determined by the delamination size and depth only; (ii) as the ratio β continues to increase, the buckling load will approach to a constant value. Solutions are verified with the well established results and are found in good agreement with the latter. |
| |
Keywords: | two-dimensional analysis rectangular laminate delamination buckling laminate theory |
本文献已被 维普 SpringerLink 等数据库收录! |
|