首页 | 本学科首页   官方微博 | 高级检索  
     检索      

钢纤维掺量对活性粉末混凝土力学性能的影响
引用本文:鞠彦忠,王德弘,李秋晨,贾玉琢,肖琦.钢纤维掺量对活性粉末混凝土力学性能的影响[J].实验力学,2011,26(3):254-260.
作者姓名:鞠彦忠  王德弘  李秋晨  贾玉琢  肖琦
作者单位:东北电力大学建筑工程学院,吉林省,吉林市,132012
基金项目:国家自然科学基金(50878040);吉林省科技发展计划项目(20060506);吉林省教育厅"十一五"科学技术研究项目(200843)
摘    要:通过实验研究了活性粉末混凝土的基本力学性能(抗压强度、劈拉强度和抗折强度),分析了钢纤维掺量对活性粉末混凝土力学性能的影响,拟合得到了抗折强度与劈拉强度之间的关系表达式。在实验分析的基础上,建立了不同钢纤维体积含量活性粉末混凝土受压应力-应变全曲线的数学表达式。研究结果表明:钢纤维体积含量在1.0%~3.5% 之间时,活性粉末混凝土的抗压强度、劈拉强度和抗折强度均随着钢纤维掺量的增加而增大;当钢纤维体积含量超过3.5% 后,活性粉末混凝土抗压强度下降,劈拉强度略有提高,而抗折强度仍有明显的提高。

关 键 词:活性粉末混凝土    钢纤维体积含量    力学性能    应力-应变全曲线

On the Influence of Steel Fiber Volume Fraction on Mechanical Properties of Reactive Powder Concrete
JU Yan-zhong,WANG De-hong,LI Qiu-chen,JIA Yu-zhuo and XIAO Qi.On the Influence of Steel Fiber Volume Fraction on Mechanical Properties of Reactive Powder Concrete[J].Journal of Experimental Mechanics,2011,26(3):254-260.
Authors:JU Yan-zhong  WANG De-hong  LI Qiu-chen  JIA Yu-zhuo and XIAO Qi
Institution:School of Architecture Engineering, Northeast Dianli University, Jilin 132012, China;School of Architecture Engineering, Northeast Dianli University, Jilin 132012, China;School of Architecture Engineering, Northeast Dianli University, Jilin 132012, China;School of Architecture Engineering, Northeast Dianli University, Jilin 132012, China;School of Architecture Engineering, Northeast Dianli University, Jilin 132012, China
Abstract:Basic mechanical properties such as compressive strength, splitting tensile strength and flexural strength of reactive powder concrete were experimentally investigated. The influence of steel fiber volume fraction on mechanical properties of RPC was analyzed. A fitted relation expression between flexural strength and splitting tensile strength was obtained. A mathematical expression for compressive stress-strain curve of reactive powder concrete was established for different stee1 fiber volume fractions based on experimental analysis.Resu1ts show that compressive strength, splitting tensile strength and flexural strength of reactive powder concrete specimens increase along with the steel fiber content increase when the steel fiber volume fraction is in the range from 1.0% to 3.5%. When the steel fiber volume fraction is higher than 3.5%, its compressive strength decreases, the splitting tensile strength increases slightly, however, its flexural strength increases obviously.
Keywords:reactive powder concrete  steel fiber volume fraction  mechanical properties  stress-strain curve
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《实验力学》浏览原始摘要信息
点击此处可从《实验力学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号