首页 | 本学科首页   官方微博 | 高级检索  
     检索      

血红细胞力学性能的纳米压痕实验和有限元模拟
引用本文:李卫卫,杨庆生,刘志远.血红细胞力学性能的纳米压痕实验和有限元模拟[J].力学学报,2012,44(3):614-621.
作者姓名:李卫卫  杨庆生  刘志远
作者单位:北京工业大学机电学院工程力学系, 北京 100124
基金项目:国家自然科学基金,北京市自然科学基金
摘    要:采用纳米压痕技术和有限元方法研究了血红细胞的生物力学性能. 进行了血红细胞的纳米压痕实验, 得到了血红细胞的材料参数和变形形貌; 在实验基础上, 建立了血红细胞的三维有限元模型, 模拟了血红细胞的压痕载荷-位移曲线, 并考虑了参数效应. 数值模拟结果和实验数据符合很好. 通过改变压头与材料之间的摩擦系数和压头曲率半径等参数, 比较了载荷-位移曲线的变化情况. 研究表明摩擦系数对压痕载荷-位移曲线和应力分布影响很小, 而压头曲率对载荷-位移曲线的影响明显.

关 键 词:血红细胞  生物力学  纳米压痕实验  有限元
收稿时间:2011-01-19
修稿时间:2011-07-24

NANOINDENTATION EXPERIMENT AND FINITE ELEMENT SIMULATION FOR BIOMECHANICAL BEHAVIOR OF RED BLOOD CELL
Li Weiwei Yang Qingsheng,Liu Zhiyuan.NANOINDENTATION EXPERIMENT AND FINITE ELEMENT SIMULATION FOR BIOMECHANICAL BEHAVIOR OF RED BLOOD CELL[J].chinese journal of theoretical and applied mechanics,2012,44(3):614-621.
Authors:Li Weiwei Yang Qingsheng  Liu Zhiyuan
Institution:Department of Engineering Mechanics, Beijing University of Technology, Beijing 100124, China
Abstract:This paper studies the biomechanical behaviors of a red blood cell(RBC) by nanoindentation technique and finite element simulation.The Young’s modulus and load-displacement curve of RBC are measured by nanoindentation.Then a 3D finite element model of RBC is built to simulate the naoindentation process.The load-displacement curves of RBC are obtained by altering friction coefficients between the tip and curvature radius of the tip.It is shown that the FEM results are agreement with the experimental data for nanoindentation of RBC.The deformation of RBC is obviously influenced by the curvature radius of the tip but slightly by the friction coefficient between the tip and the cell.
Keywords:red blood cell  biomechanics  nanoindentation  finite element modeling
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《力学学报》浏览原始摘要信息
点击此处可从《力学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号