首页 | 本学科首页   官方微博 | 高级检索  
     检索      

电爆炸过程中金属丝阻抗的变化
引用本文:杨家志,刘钟阳,许东卫,刘天杰.电爆炸过程中金属丝阻抗的变化[J].爆炸与冲击,2009,29(2):205-208.
作者姓名:杨家志  刘钟阳  许东卫  刘天杰
作者单位:1.大连理工大学电气工程与应用电子技术系,辽宁 大连 116024
摘    要:为了掌握金属丝阻抗的变化规律,通过分压器和罗氏线圈分别测量出电爆炸过程中金属丝上的电压和电流,并由此计算出金属丝阻抗等相关电参数随时间变化的规律;采用F.D.Bennett和A.Hobson模型对金属丝阻抗进行了数值模拟,得到金属丝阻抗随时间的变化规律。实验结果和模拟结果的比较表明:两个模型的模拟结果均在金属丝气化前和部分初始放电电压下有效;当放电时电容器初始电压较大时,能量沉积速度更快,金属丝液化、气化、完全气化所用的时间更短;在金属丝爆炸过程中,金属丝阻抗存在一个最大值。

关 键 词:爆炸力学    阻抗变化    数值模拟    金属丝电爆炸

Wire resistance variation during its electrical explosion
YANG Jia-zhi,LIU Zhong-yang,XU Dong-wei,LIU Tian-jie.Wire resistance variation during its electrical explosion[J].Explosion and Shock Waves,2009,29(2):205-208.
Authors:YANG Jia-zhi  LIU Zhong-yang  XU Dong-wei  LIU Tian-jie
Institution:1.Department of Electrical and Electronics Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
Abstract:The voltage and current of an exploding wire before its complete evaporation was obtained experimentally,and the variation of wire resistance and other parameters were calculated based on the experimental results.Bennett and Hobson's models were applied in simulating the resistance variation under the experimental parameters.The comparison between the experimental and simulated results shows that these two models are useful to guide the practice.These two models are both effective before the complete evapor...
Keywords:mechanics of explosion  resistance variation  numerical simulation  exploding wire  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《爆炸与冲击》浏览原始摘要信息
点击此处可从《爆炸与冲击》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号