首页 | 本学科首页   官方微博 | 高级检索  
     检索      

泡沫铝泡孔动态变形特性研究
引用本文:潘艺,胡时胜,蒋家桥,黄西成.泡沫铝泡孔动态变形特性研究[J].爆炸与冲击,2004,24(5):407-412.
作者姓名:潘艺  胡时胜  蒋家桥  黄西成
作者单位:1. 中国科学技术大学中国科学院材料力学行为和设计重点实验室,安徽,合肥,230027
2. 中国工程物理研究院结构力学研究所,四川,绵阳,621900
基金项目:国家自然科学基金 , 中国工程物理研究院联合基金
摘    要:在SHPB实验中采用应变冻结法将试件冻结于设定的压缩应变,然后观察内部泡孔的变形情况并讨论其变形机理。分别对同一相对密度(40%)、不同基体材料的两种泡沫铝以及两种相对密度(19%和8%)、相同基体材料的泡沫铝进行实验,讨论了基体材料的本构关系、泡沫的相对密度对变形模式的影响。利用ANSYS/LS DYNA软件对泡沫铝在动态压缩时泡孔的变形进行数值模拟计算,进一步说明泡沫铝泡孔变形的模式与基体材料本构关系及相对密度的关系。

关 键 词:固体力学  本构关系  数值模拟  泡沫铝  相对密度  泡沫铝  泡孔  动态压缩  变形特性  研究  aluminum  foams  cell  材料本构关系  基体材料  变形模式  模拟计算  数值  软件  ANSYS  利用  影响  相对密度  变形机理  情况  冻结法
文章编号:1001-1455(2004)05-0407-06
修稿时间:2003年10月16日

Dynamic deformability of cell in aluminum foams
PAN Yi.Dynamic deformability of cell in aluminum foams[J].Explosion and Shock Waves,2004,24(5):407-412.
Authors:PAN Yi
Abstract:A "strain confining" method is used to control the deformation of the specimen in five given strain levels in SHPB test. Mechanical properties are discussed based on the metallographic observation on the specimens. Experiments on a series of aluminum foams with different cell size and relative density are carried out. The effects of the physical factors, such as constitutive relation of matrix material, relative density and cell's regularity are discussed based on deformation modes. LS-DYNA software is used to simulate and demonstrate the deformation of aluminum foam. The constitutive relation of matrix material is the most significant factor to determine the foams deformation mode.
Keywords:solid mechanics  constitutive relation  numerical simulate  aluminum foam  relative density
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《爆炸与冲击》浏览原始摘要信息
点击此处可从《爆炸与冲击》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号