首页 | 本学科首页   官方微博 | 高级检索  
     检索      

压杆/试样表面接触变形对SHPB实验应变测量的影响
引用本文:张祖根,李英雷,李英华,陈熙盟.压杆/试样表面接触变形对SHPB实验应变测量的影响[J].爆炸与冲击,2009,29(6):573-578.
作者姓名:张祖根  李英雷  李英华  陈熙盟
作者单位:兰州大学核科学与技术学院,甘肃,兰州,730000;中国工程物理研究院流体物理研究所冲击波物理与爆轰物理国防科技重点实验室,四川 绵阳 621900;中国工程物理研究院流体物理研究所冲击波物理与爆轰物理国防科技重点实验室,四川,绵阳,621900;兰州大学核科学与技术学院,甘肃,兰州,730000
摘    要:采用SHPB(split Hopkinson pressure bar)实验技术测量了3种不同尺寸纯铁试样的动态压缩应力应变关系,根据实验结果提出一个经验模型,定量分析了SHPB实验中压杆/试样表面接触变形对应变测量的影响。分析表明,在轴向应力平衡条件下,表面的接触变形对弹性段的应变测量影响显著;对塑性段应变测量的影响与试样的强化模量和长度相关,当试样强化模量较大而长度较小时,这种影响将不可忽略,可根据影响量的经验分析模型对应变进行修正。

关 键 词:固体力学  应变修正  SHPB  接触变形  应变测量

Influences of bar/specimen contact surfaces' indentation on strain measurement in SHPB experiments
ZHANG zu-gen,LI ying-lei,LI ying-hua,CHEN xi-meng.Influences of bar/specimen contact surfaces'' indentation on strain measurement in SHPB experiments[J].Explosion and Shock Waves,2009,29(6):573-578.
Authors:ZHANG zu-gen  LI ying-lei  LI ying-hua  CHEN xi-meng
Institution:1.School of Nuclear Science and Technology, Lanzhou University, Lanzhou 730000, Gansu, China;2.National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, Sichuan, China
Abstract:The dynamic compression stress-strain relations of iron specimens with three sizes were obtained with a split Hopkinson pressure bar apparatus.Based on these experimental results,an empirical model was presented to quantitatively describe the influence of bar/specimen contact surfaces' indentation on strain measurement in SHPB experiments.This research shows that the influence on elastic strain is obvious,even when the uneven stress states in specimens eliminated by using pulse shapers;while the influence o...
Keywords:SHPB  solids mechanics  strain correction  SHPB  strain measurement  indentation on contact surface
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《爆炸与冲击》浏览原始摘要信息
点击此处可从《爆炸与冲击》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号