首页 | 本学科首页   官方微博 | 高级检索  
     检索      

铝颗粒在激波后气流作用下的点火
引用本文:洪滔.铝颗粒在激波后气流作用下的点火[J].爆炸与冲击,2002,22(1):35-39.
作者姓名:洪滔
作者单位:北京应用物理与计算数学研究所,北京,100088
基金项目:中国工程物理研究院项目;20000109;
摘    要:对铝颗粒在激波后气流作用下的点火进行了理论分析 ,用三个不同的判据得到铝颗粒点火的延时曲线并与实验进行了比较。理论分析结果表明 ,铝颗粒可以在远低于Al2 O3 的熔点被点火 ,甚至只要在铝的熔点时就被点火。提出的铝颗粒在温度达到铝的熔点且铝完全熔化时被点火这个判据在一些条件下与实验符合很好。如果铝颗粒表面的氧化层较厚 ,则点火温度为氧化铝的熔点。

关 键 词:铝颗粒  激波点火  点火延时  后气流作用  熔点  点火判据  炸药  推进剂  燃料添加剂
文章编号:1001-1455(2002)01-0035-05
修稿时间:2001年1月2日

Theoretical Study of Shock Wave Ignition of Aluminum Particles
HONG Tao.Theoretical Study of Shock Wave Ignition of Aluminum Particles[J].Explosion and Shock Waves,2002,22(1):35-39.
Authors:HONG Tao
Abstract:The ignition of aluminum particles behind shock waves is analyzed with three different criteria.Ignition delay time with different Mach number of incident shock waves is obtained and compared with experimental results.Theoretical results showed that aluminum particles is ignited at the temperature much lower than the melting point of aluminum oxide in the flow field behind shock waves.In this work it is assumed that aluminum particles are ignited as their temperature reaches the melting point of aluminum and all of the aluminum of particles are melted behind shock waves.The ignition delay time obtained by this criterion is best agreed with experimental results. If oxided layer on paiticle surface is thick enough,its ignition temperature is at the melting point of aluminum oxide.
Keywords:shock wave ignition  aluminum particle  ignition delay time
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《爆炸与冲击》浏览原始摘要信息
点击此处可从《爆炸与冲击》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号