乙醚云雾场燃爆参数实验研究

基于自行研发的20 L二次脉冲气动喷雾多相爆炸测试系统和全散射粒径测量系统，对乙醚液体燃料瞬态雾化云雾场的燃爆参数进行实验研究。通过调节气动压力、设计喷雾剂量，得到了粒径相同、质量浓度不同的乙醚云雾燃爆超压、温度及点火延迟时间等燃爆参数。结果表明，在索特平均直径为22.90 μm的条件下:乙醚云雾与空气混合物的燃爆下限为80.26 g/m3，燃爆上限为417.34 g/m3；最大超压峰值为0.78 MPa，其出现在云雾质量浓度为278.23 g/m3时；最大爆温峰值为1 260 ℃，其出现在云雾质量浓度为228.29 g/m3时；点火延迟时间在燃爆极限范围内呈U型分布。

Experimental research on explosion parameters of diethyl ether mist

The Mei extinction detection system and the self-developed 20 L pulse pneumatic spray multiphase explosion test system were applied to experimentally investigate the explosion parameters of the diethyl ether mist/air mixtures. By regulating pneumatic pressure and designing spray dose, the explosion parameters of the diethyl ether mist/air mixtures with the same particle size and different mass concentrations were obtained including explosion overpressure, explosion temperature and ignition delay time. The results show that when the Sauter mean diameter of diethyl ether mist is 22.90 μm, the lower explosion limit of diethyl ether mist/air mixtures is 80.261 g/m3, the upper explosion limit is 417.34 g/m3, the highest peak overpressure is 0.78 MPa which occurs with the mass concentration as 278.23 g/m3, the highest peak temperature is 1 260 ℃ which occurs with the mass concentration as 228.29 g/m3, and the ignition delay time takes on a U-shaped distribution in the explosion limit range.