| 预制破片侵彻均质装甲钢的极限穿透速度 |
| |
| 引用本文： | 赵丽俊,焦志刚,李晓婕,黄晓杰,赵东志,朱小平,唐辉,王昌富,田振,喻薪宁.预制破片侵彻均质装甲钢的极限穿透速度[J].爆炸与冲击,2018,38(1):183-190. |
| |
| 作者姓名： | 赵丽俊 焦志刚 李晓婕 黄晓杰 赵东志 朱小平 唐辉 王昌富 田振 喻薪宁 |
| |
| 作者单位： | 沈阳理工大学装备工程学院,辽宁沈阳110159;北方华安工业集团有限公司123厂科研一所,黑龙江齐齐哈尔161046;沈阳理工大学装备工程学院,辽宁沈阳,110159;北方华安工业集团有限公司123厂科研一所,黑龙江齐齐哈尔,161046 |
| |
| 摘 要： | 通过对预制破片侵彻均质装甲钢的过程进行受力分析，推导预制破片极限穿透速度的计算公式，分别对3种形状规则预制破片的极限穿透速度进行理论计算，并通过实弹驱动试验和弹道枪模拟复核试验测得极限穿透速度与理论计算结果相对比，得出理论计算结果与试验结果的误差，通过数据分析处理给出计算公式的修正系数。
|
| 关 键 词： | 预制破片 弹道枪 均质装甲钢 极限穿透速度 |
| 收稿时间： | 2016-05-03 |
Critical penetration velocity of prefabricated fragment in penetrating homogeneous armor steel plate |
| |
| ZHAO Lijun,JIAO Zhigang,LI Xiaojie,HUANG Xiaojie,ZHAO Dongzhi,ZHU Xiaoping,TANG Hui,WANG Changfu,TIAN Zhen,YU Xinning.Critical penetration velocity of prefabricated fragment in penetrating homogeneous armor steel plate[J].Explosion and Shock Waves,2018,38(1):183-190. |
| |
| Authors: | ZHAO Lijun JIAO Zhigang LI Xiaojie HUANG Xiaojie ZHAO Dongzhi ZHU Xiaoping TANG Hui WANG Changfu TIAN Zhen YU Xinning |
| |
| Institution: | 1.College of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning, China2.The Scientific Research one Institute of 123 Factory, North Hua'an Industrial Group Co. Ltd.Qiqihaer 161046, Heilongjiang, China |
| |
| Abstract: | In this study,we at first made a mechanical analysis of the process of the prefabricated fragment penetrating fully the homogeneous armor plate using theoretical calculation and experimental study,and derived the penetration velocity respectively for three shapes of prefabricated fragments.Then,by combining live testing with simulation,we obtained this penetration velocity and had it compared with the theoretical calculation results,thereby arriving at the error between them and coming out with the revised coefficient for the critical penetration velocity. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《爆炸与冲击》浏览原始摘要信息 |
| 点击此处可从《爆炸与冲击》下载免费的PDF全文 |
|
