| 相变温度对NiTi形状记忆合金耐磨性的影响 |
| |
| 引用本文： | 潘毅,于学勇,程凤军,杨廷贵.相变温度对NiTi形状记忆合金耐磨性的影响[J].摩擦学学报,2007,27(4):398-400. |
| |
| 作者姓名： | 潘毅 于学勇 程凤军 杨廷贵 |
| |
| 作者单位： | 1. 常熟理工学院,机电系,江苏,常熟,215500
2. 四川大学,材料成型系,四川,成都,610065 |
| |
| 基金项目： | 江苏省高校自然科学基金 |
| |
| 摘 要： | 利用WMW-1型摩擦磨损试验机研究了在相同条件下相变温度对6种NiTi形状记忆合金耐磨性的影响,并分析其磨损机制.结果表明:超弹状态NiTi合金具有热弹性马氏体相变、高阻尼效应、应力诱发马氏体和超弹性等特性而使得其耐磨性较好,合金的耐磨性主要取决于相变温度、Ni原子的析出情况和合金硬度.
|
| 关 键 词： | 形状记忆合金 镍钛合金 超弹性 磨粒磨损性能 |
| 文章编号： | 1004-0595（2007）04-0398-03 |
| 收稿时间： | 8/9/2006 12:00:00 AM |
| 修稿时间： | 2006-08-092006-11-30 |
Effect of Transformation Temperature on Anti-wear Behavior of NiTi Shape Memory Alloys |
| |
| PAN Yi,YU Xue-yong,CHENG Feng-jun,YANG Ting-gui.Effect of Transformation Temperature on Anti-wear Behavior of NiTi Shape Memory Alloys[J].Tribology,2007,27(4):398-400. |
| |
| Authors: | PAN Yi YU Xue-yong CHENG Feng-jun YANG Ting-gui |
| |
| Institution: | 1. Department of Mechatroronics Engineering, Changshu Institute of Technology, Changshu 215500, China; 2. Department of Material Forming Engineering, Sichuan University, Chengdu 610065, China |
| |
| Abstract: | Characterization and correlation of wear behaviour of NiTi SMA in different phases were investigated by using pin-on-disk friction and wear tester, XRD and Optical micrographs. The experimental results indicate that the thermoelastic martensitic transformations caused superelastic effect, the high damping effect and reorientation and coalescence of martensitic plates promoted a high ability to accommodate large deformation without generating permanent damages which may cause wear. The wear resistance was mainly dependent on the transformation tempera- ture for both alloys. Ni atomic percentage and the hardness of the alloys are also important parameters in the wear behavior of NiTi alloys. |
| |
| Keywords: | shape memory alloy NiTi alloy superelasticity abrasive wear behavior |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《摩擦学学报》浏览原始摘要信息 |
| 点击此处可从《摩擦学学报》下载免费的PDF全文 |
|
