首页 | 本学科首页   官方微博 | 高级检索  
     检索      

一类反常弹流油膜出现的实验研究
引用本文:王学锋,郭峰,付忠学,杨沛然.一类反常弹流油膜出现的实验研究[J].摩擦学学报,2007,27(3):269-273.
作者姓名:王学锋  郭峰  付忠学  杨沛然
作者单位:青岛理工大学,机械工程学院,山东,青岛,266033
基金项目:国家自然科学基金,山东省自然科学基金,青岛市科技发展基金联合资助项目
摘    要:采用光干涉法对球-圆盘和椭圆滚子-圆盘形成弹流油膜的凹陷现象进行研究.结果表明:凹陷只存在于一定的速度范围内,并受到载荷、卷吸方向及运动条件的影响;在速度-载荷关系曲线上,凹陷出现区域为一开放的三角形;润滑油的极限剪应力特性及其诱发的界面滑移为凹陷产生的原因.

关 键 词:弹性流体动力润滑(EHL)  凹陷  极限剪应力
文章编号:1004-0595(2007)03-0269-05
修稿时间:2006-06-152006-09-20

Experimental Study of an Abnormal EHL Film with Inlet-dimples
WANG Xue-feng,GUO Feng,FU Zhong-xue,YANG Pei-ran.Experimental Study of an Abnormal EHL Film with Inlet-dimples[J].Tribology,2007,27(3):269-273.
Authors:WANG Xue-feng  GUO Feng  FU Zhong-xue  YANG Pei-ran
Institution:School of Mechanical Engineering, Qingdao Technological University, Qingdao 266033, China
Abstract:Using optical interferometry, elastohydrodynmic lubrication of films with an inlet-dimple was studied experimentally under ball-on-disc and spherical roller-on-disc contacts. The results show that the dimple only apwithin a limited entrainment speed range, and this speed range was influenced by applied loads, the entrainment direction and the kinematic condition. The occurrence regime of the dimple had a triangular shape in terms of load versus speed. The observed inlet dimple can be tentatively interpreted by limiting shear stress or wall slippage.
Keywords:elastohydrodynamic lubrication  dimple  limiting shear stress
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《摩擦学学报》浏览原始摘要信息
点击此处可从《摩擦学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号