| 三种微动参量对2Cr13不锈钢微动摩擦磨损性能的影响 |
| |
| 引用本文： | 杨德华,张绪寿.三种微动参量对2Cr13不锈钢微动摩擦磨损性能的影响[J].摩擦学学报,1993,13(4):371-377. |
| |
| 作者姓名： | 杨德华 张绪寿 |
| |
| 作者单位： | 中国科学院兰州化学物理研究所固体润滑开放研究实验室，中国科学院兰州化学物理研究所固体润滑开放研究实验室，中国科学院兰州化学物理研究所固体润滑开放研究实验室 兰州 730000，兰州 730000，兰州 730000 |
| |
| 摘 要： | 本文简要报道了微动振幅、循环数和负荷对分别经８６０℃退火、激光相变硬化和激光熔凝渗碳处理的２Ｃｒ１３不锈钢微动摩擦磨损性能之影响的研究结果。文章指出，这３种微动参量的增大都使微动磨损体积增大，但其对微动摩擦系数的影响却比较复杂：摩擦系数随循环数的增加先是急剧增大，然后增大速度明显减缓并逐渐趋于稳定；摩擦系数随负荷的增加而下降，其在负荷增至８０Ｎ时达到最低点，然后又随负荷的增加而缓慢上升；微动振幅的
|
| 关 键 词： | 微动参量 不锈钢 微动摩擦磨损 |
Effects of Fretting Parameters on the Fretting Friction-Wear Behaviors of 2Cr13 Stainless Steel |
| |
| Yang Dehua Zhang Xushou Xue Qunji.Effects of Fretting Parameters on the Fretting Friction-Wear Behaviors of 2Cr13 Stainless Steel[J].Tribology,1993,13(4):371-377. |
| |
| Authors: | Yang Dehua Zhang Xushou Xue Qunji |
| |
| Abstract: | The effects of fretting slip amplitude, load and number of cycle on the fretting friction and wear behaviors of laser transformation hardened, laser melt-solidification cemented and annealed 2Cr13 stainless steel were investigated in this paper. The rasults shown that fretting wear volumes increase with the increasing of the above mentioned three parameters, the changes of the fretting friction coefficient is complicated: along with the increase of load it decreases rapidly at the first, and then this decrease becomes more and more slowly and tends to stabilizing, the enlargement of fretting amplitude has no effect on the fretting friction coefficient. |
| |
| Keywords: | fretting parameters fretting wear volume fretting friction coefficient 2Cr 13 stainless steel |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《摩擦学学报》浏览原始摘要信息 |
| 点击此处可从《摩擦学学报》下载免费的PDF全文 |
