孔隙率对纸基摩擦材料的压缩回弹和摩擦磨损性能影响的研究

研究了孔隙率对1种混杂纤维增强纸基摩擦材料压缩回弹性以及摩擦磨损性能的影响.结果表明:在相同载荷下,随着孔隙率增大,材料的压缩率增加而回弹率降低,随着载荷增加,高孔隙率材料的回弹率先明显增大,而后趋于稳定;在相同比压和转速下,孔隙率越高,材料的摩擦系数越大,随着比压增加,孔隙率高的材料摩擦系数逐渐降低,且不同孔隙率材料的摩擦系数逐渐趋于一致;在连续循环制动时,高孔隙率材料的摩擦系数逐渐降低并趋于稳定.这是由于在较高压力下,高孔隙率材料的孔隙会引起塌陷,使其孔隙率降低,从而影响材料的压缩回弹性和摩擦磨损性能.

Influence of Porosity of Paper-based Friction Materials on Compressure-resilience and Tribology Properties

Influence of porosity on the compression-resilience and tribology properties of a hybrid fiber reinforced paper-based friction material that consist of same composition and different porosity were investigated. The results show that when the porosity of sample was higher, compressure rate was higher and resilience rate was lower, however resilient rate of sample with higher porosity were increased notably when pressure was increased, and it tended to accord with of sample with lower porosity. The friction coefficient was higher when porosity of paper-based friction material was higher, and the friction coefficient tended to reduce and stabilize when braking pressure was increased. The friction coefficient of sample with high porosity tended to reduce and stabilize in continuous braking cycles. This is because the pore wall of paper-based material with high porosity collapsed in the condition of higher pressure and continuous braking cycles, which caused change of compression-resilience and tribology properties.