High-throughput generation of uniform droplets from parallel microchannel droplet generators and the preparation of polystyrene microsphere material

To prepare uniform polystyrene particles with ten microns of diameter, a parallel scaling-up strategy for the capillary-assembled stepwise microchannel was developed, which created uniform droplets with high-throughput and formed a large amount of emulsion templates for the polymerization of styrene and cross-linker. The microchannel droplet generator was robust for the flow rate deviation of the continuous phase in the jetting flow, and droplet generation frequency up to 2.8 × 10⁴ Hz was achieved with only four parallel droplet generators, which were much more efficient than the parallelly scaled microfluidic devices working in dripping flow. 32–52 μm average diameter droplets with 4.5%–8.4% diameter variation coefficients were successfully prepared from the microchannel device fabricated by low-cost 3D-print method, and the droplets were subsequently turned to solid particles via a two-step polymerization in the platform. The polystyrene particles were further reduced to 16.9–23.5 μm with 5.0%–8.6% diameter variation coefficients due to the accompanying emulsion polymerization, and the working capacity of the platform reached hundred milligrams of particles per hour.