首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于捷联惯导的航空重力测量滤波算法
引用本文:张开东,吴美平,胡小平.基于捷联惯导的航空重力测量滤波算法[J].中国惯性技术学报,2007,15(1):5-8.
作者姓名:张开东  吴美平  胡小平
作者单位:国防科技大学,机电工程与自动化学院,长沙,410073
基金项目:国家高技术研究发展计划(863计划)
摘    要:在航空重力测量中通常需要采用卡尔曼滤波来对比力测量误差进行估计。针对航空重力测量只需要进行事后处理的特点,提出了两种新方法来提高比力测量的精度:一是最优卡尔曼滤波平滑算法,该算法的估计值是前向/反向卡尔曼滤波器的估计值的最优组合;二是迭代算法,由于在滤波模型中通常不对重力异常进行建模,而模型误差的存在会降低滤波精度,迭代算法的基本思想是将重力异常估计值代入新的导航解算,以此降低重力异常对滤波估计精度的影响。仿真分析表明所提出的方法能有效提高比力测量的精度,同时表明滤波估计是有偏的,因此还需要采用网格平差等方法来消除系统误差。

关 键 词:航空重力测量  最优卡尔曼滤波平滑  迭代计算  比力测量
文章编号:1005-6734(2007)01-0005-04
修稿时间:2006-11-08

Filtering algorithm of airborne gravimetry based on SINS
ZHANG Kai-dong,WU Mei-ping,HU Xiao-ping.Filtering algorithm of airborne gravimetry based on SINS[J].Journal of Chinese Inertial Technology,2007,15(1):5-8.
Authors:ZHANG Kai-dong  WU Mei-ping  HU Xiao-ping
Institution:Mechatronics and Automation School, National University of Defense Technology, Changsha 410073, China
Abstract:Two new methods were presented to improve the accuracy of specific force considering that only post-processing was needed in airborne gravimetry. The first was optimal Kalman filter/smoother, and its estimation was the optimal combination of the estimation of forward/backward Kalman filters. The second was iteration algorithm. Since the gravity anomaly was generally not modeled in the filtering model, the model error would reduce the accuracy of estimation. The basic idea of the iteration algorithm was to reduce the influence of model error using the estimated gravity anomaly in the next navigation calculation. Simulation analysis shows that the methods can improve the accuracy of specific force effectively, but the estimation has deviation, so other methods such as crossover adjustment are needed to remove the systematic error.
Keywords:airborne gravimetry  optimal kalman filter/smoother  iterative  specific force
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号