| 振动轮式微机械陀螺频率配置和气压选择 |
| |
| 引用本文： | 陈志勇,高钟毓,张嵘.振动轮式微机械陀螺频率配置和气压选择[J].中国惯性技术学报,2001,9(3):53-56. |
| |
| 作者姓名： | 陈志勇 高钟毓 张嵘 |
| |
| 作者单位： | 清华大学精密仪器与机械学系 |
| |
| 摘 要： | 推导了振动轮式微机械陀螺的输出信号与输入角速度的幅频、相频关系，讨论了在不同的频率配置和品质因数下陀螺的灵敏度、带宽和零位稳定性。陀螺振动频率应设计在2kHz左右，检测轴自然频率比驱动轴高一个陀螺频带宽度。根据实测陀螺振动品质因数与气压的关系曲线，振动轮式微机械陀螺合适的工作气压是100Pa-1000Pa。
|
| 关 键 词： | 微机械陀螺 自然频率 品质因数 振动轮式 频率配置 气压选择 振动模态 输出信号 输入角速度 工作气压 |
| 文章编号： | 1005-6734(2001)03-0053-04 |
| 修稿时间： | 2001年4月1日 |
Arrangement of Vibration Frequency and Selection of Operation Pressure for Micromachined Vibrating Wheel Gyro |
| |
| CHEN Zhiyong,GAO Zhongyu,ZHANG Rong.Arrangement of Vibration Frequency and Selection of Operation Pressure for Micromachined Vibrating Wheel Gyro[J].Journal of Chinese Inertial Technology,2001,9(3):53-56. |
| |
| Authors: | CHEN Zhiyong GAO Zhongyu ZHANG Rong |
| |
| Abstract: | The amplitudefrequency and phasefrequency relationships between the input angular rate and the output of a micromachined vibrating wheel gyro are derived,the sensitivity bandwidth and zero stability of the gyro in different frequencies arrangement and quality factors are discussed.The natural frequency of the gyro should be about 2 kHz,and the natural frequency of senseaxis should be one bandwidth higher than that of driveaxis. According to the experimental relationship between the Qfactor and the pressure,the appropriate operation pressure of the gyro is about 100 Pa to 1 000 Pa. |
| |
| Keywords: | micromachined gyroscope natural frequency quality factor pressure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
