首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于双剪统一强度理论的复式钢管混凝土轴压承载力计算
引用本文:张玉芬,赵均海,刘一颖.基于双剪统一强度理论的复式钢管混凝土轴压承载力计算[J].力学与实践,2012,34(3):36-42.
作者姓名:张玉芬  赵均海  刘一颖
作者单位:1. 清华大学土木工程安全与耐久教育部重点实验室, 北京 100084;2. 长安大学建筑工程学院, 西安 710061;3. 海军工程质量监督站, 北京 100161
基金项目:国家自然科学基金,中央高校科研业务费资助项目,清华大学土木工程安全与耐久教育部重点实验室开放基金
摘    要:考虑内、外钢管对混凝土的双重约束作用, 分析复式钢管混凝土的轴压应力状态, 采用双剪统一强度理论分析混凝土和钢管各自的极限轴压强度, 得出复式钢管混凝土轴压承载力公式; 通过推导钢管在极限状态的强度折减系数及钢管与混凝土之间的紧箍力值, 计算出的轴压承载力与试验数据进行对比, 吻合较好, 验证了双剪统一强度理论在复式钢管混凝土轴压承载力计算中的适用性; 并给出了内圆钢管的径厚比和直径与轴压承载力提高系数的关系, 为复式钢管混凝土的优化设计提供理论依据.

关 键 词:复式钢管混凝土  双剪统一强度理论  轴压承载力  套箍约束  
收稿时间:2011-09-29;

CALCULATION OF COMPRESSIVE BEARING CAPACITY OF CONCRETE—FILLED TWIN STEEL TUBES BASED ON TWIN SHEAR UNIFIED STRENGTH THEORY
ZHANG Yufen, ZHAO Junhai LIU Yiying.CALCULATION OF COMPRESSIVE BEARING CAPACITY OF CONCRETE—FILLED TWIN STEEL TUBES BASED ON TWIN SHEAR UNIFIED STRENGTH THEORY[J].Mechanics and Engineering,2012,34(3):36-42.
Authors:ZHANG Yufen  ZHAO Junhai LIU Yiying
Institution:1. Key Laboratory of Civil Engineering Safety and Durability, China Ministry of Education, Tsinghua University, Beijing 100084, China;2. School of Civil Engineering, Chang'an University, Xi'an 710061, China;3. Quality Supervision Station, Navy Construction Bureau, Beijing 100161, China
Abstract:With consideration of the double confinement to the concrete from the twin tubes,the stresses in the concrete and the steel tubes were analyzed,and the ultimate compressive strength was calculated based on the twin shear unified strength theory.The strength reduction factor(βf) was deduced according to plasticity theory,and the confining force between the steel and the concrete was also obtained.Then,the ultimate load capacities of the concrete filled twin steel tubes under axial compression was computed.In comparison with the corresponding experimental results,it is shown that the twin shear unified strength theory can be used in the calculation of the axial capacity.The axial compressive strength of composite column was shown to be influenced by the diameter-to-thickness ratio and the diameter of the inner circular steel tube.The optimal design of the inner steel tubes is presented for the engineering application of these composite columns.
Keywords:concrete-filled twin steel tubes  twin shear unified strength theory  compressive bearing capacity  confinement
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《力学与实践》浏览原始摘要信息
点击此处可从《力学与实践》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号