首页 | 本学科首页   官方微博 | 高级检索  
     检索      

力学在三峡船闸人字门背拉杆调试中的应用
引用本文:刘利珍,张宏志,何正勇.力学在三峡船闸人字门背拉杆调试中的应用[J].力学与实践,2005,27(5):43-45,49.
作者姓名:刘利珍  张宏志  何正勇
作者单位:武汉大学土木建筑工程学院,武汉,430072
摘    要:船闸人字闸门在水压力、自重等荷载作用下,易于发生扭曲变形,在人字闸门背后设置背拉杆是增加闸门抗扭措施之一.基于三峡船闸人字闸门背拉杆预应力施工工艺试验,通过建立预应力优化模型求得各组背拉杆的预应力施加控制条件,并通过预应力施加过程分析总结了传统的扭矩法施工工艺失败的原因,在分析闸门受力与变形规律的基础上提出了无扭矩的施加预应力以及只张拉主背拉杆等系列预应力优化施工工艺.这些新工艺提高了三峡船闸闸门施工质量和测控精度.

关 键 词:三峡船闸  人字门  背拉杆  预应力  调试
收稿时间:2004-07-26
修稿时间:2004-07-262005-03-01

MECHANICAL ANALYSIS ON ADJUSTMENT OF PRESTRESS IN BACK TIE RODS OF MITRE GATE IN THREE GORGES PROJECT
LIU Lizhen,ZHANG Hongzhi,HE Zhengyong.MECHANICAL ANALYSIS ON ADJUSTMENT OF PRESTRESS IN BACK TIE RODS OF MITRE GATE IN THREE GORGES PROJECT[J].Mechanics and Engineering,2005,27(5):43-45,49.
Authors:LIU Lizhen  ZHANG Hongzhi  HE Zhengyong
Institution:Wuhan University, Wuhan 430072, China
Abstract:The gates of ship lock undergo considerable torsional deformation while carrying the loads of water pressure, deadweight etc. To fix tied-rods on the back of the gates is one of the measures to resist the deformation.In this paper, based on the experiments to prestress the tied-rods on the gates of the ship lock in the Three Gorges project, the conditions how to control prestress are obtained by means of an optimized model of prestress. The failure of the traditional twisting-moment-method is analyzed. Thus, a technological procedure to prestress the tied-rods on the back of the gates without twisting-moment is proposed, together with a series of new technologies, such as to make main tied-rods in tension only. These new technologies improve the construction quantity, the accuracy of installing the gates of ship lock in the Three Gorges project.
Keywords:ship lock of Three Gorges project  mitre gate  back tie rod  prestress  adjustment
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号