首页 | 本学科首页   官方微博 | 高级检索  
     检索      

侧压式道气道流场特性研究
引用本文:向安宇,岳连捷,肖雅彬,王世芬,陈立红,张新宇.侧压式道气道流场特性研究[J].力学与实践,2007,29(3):7-10.
作者姓名:向安宇  岳连捷  肖雅彬  王世芬  陈立红  张新宇
作者单位:中国科学院力学研究所 中国科学院力学研究所 中国科学院力学研究所 中国科学院力学研究所 中科院力学所高温气体动力学开放实验室 100080 Tel: 62613248 中科院力学所高温气体动力学开放实验室 100080 Tel: 62613248
摘    要:应用表面油流和压力测量技术,结合数值模拟方法研究了超燃冲压发动机侧压式进气道无支板和有支板两种典型工况的基本流动特性.结果表明:由侧壁诱发的后掠激波与底板边界层相互作用,形成一对逆向旋转的漩涡,该漩涡在下游不断发展并偏离底板,在出口截面形成一个低马赫数低总压区;支板的引入增加了压缩率,但同时导致底板与侧壁边界层严重分离,使进气道性能偏离设计工况.

关 键 词:超燃冲压发动机  侧压式进气道  流场显示
收稿时间:2006-4-19
修稿时间:2006-04-192006-06-19

INVESTIGATION ON SIDEWALL COMPRESSION SCRAMJET INLET
XIANG Anyu,YUE Lianjie,XIAO Yabin,WANG Shifen,CHEN Lihong,ZHANG Xinyu.INVESTIGATION ON SIDEWALL COMPRESSION SCRAMJET INLET[J].Mechanics and Engineering,2007,29(3):7-10.
Authors:XIANG Anyu  YUE Lianjie  XIAO Yabin  WANG Shifen  CHEN Lihong  ZHANG Xinyu
Institution:Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, CAS, Beijing 100080, China
Abstract:The flow field in a sidewall compression scramjet inlet is studied using the surface oil dot visualization, pressure measurements and numerical simulations.Two types of sidewall scramjet inlets with or without a strut are investigated.It is shown that a pair of converse vortices emanate from the fin-plate junction and then depart from the baseplate,which results in a region with low Mach number and low total pressure at the inlet exit. Furthermore,it is shown that the boundary layer separation on the sidewall and baseplate resulting from a strut degrades the performance of the inlet.
Keywords:scramjet  sidewall compression inlet  flow visualization
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《力学与实践》浏览原始摘要信息
点击此处可从《力学与实践》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号