| 基于CTOD/CTOA管道钢断裂韧性测试方法研究进展 |
| |
| 引用本文： | 王俊强,帅健,马彬.基于CTOD/CTOA管道钢断裂韧性测试方法研究进展[J].力学与实践,2012,34(5):6-15. |
| |
| 作者姓名： | 王俊强 帅健 马彬 |
| |
| 作者单位： | 中国石油大学(北京) 机械与储运工程学院,北京 102249 |
| |
| 基金项目： | 高等学校博士学科点专项科研基金资助项目 |
| |
| 摘 要： | 高级别管线钢的一大特点是韧度高,导致管材裂纹尖端周围经常处于大范围屈服状态,现有基于高约束试件的断裂韧性测试方法,很难满足新型管材的断裂韧性测试要求. 本文回顾了基于CTOD 和CTOA的断裂韧度参数,详细介绍了管道钢断裂韧性测试方法的研究现状和发展趋势,分析了影响管道钢断裂韧性测试准确性的各种因素,为管道钢断裂韧性的测试提供帮助.
|
| 关 键 词： | 油气管道 断裂韧度 测试方法 裂纹尖端张开位移 裂纹尖端张开角 |
| 收稿时间： | 2012-03-01; |
ADVANCES IN TEST METHODS FOR FRACTURE TOUGHNESS BASED ON CTOD/CTOA FOR PIPELINE STEELS |
| |
| WANG Junqiang,SHUAI Jian MA Bin.ADVANCES IN TEST METHODS FOR FRACTURE TOUGHNESS BASED ON CTOD/CTOA FOR PIPELINE STEELS[J].Mechanics and Engineering,2012,34(5):6-15. |
| |
| Authors: | WANG Junqiang SHUAI Jian MA Bin |
| |
| Institution: | College of Mechanical and Transportation Engineering, China University of Petroleum-Bejing, Beijing 102249, China |
| |
| Abstract: | The high-level pipeline steel is characterized by high toughness, with a wide range of plastic yielding zone around the crack tip, the existing test methods are difficult to meet the requirements for determination of its fracture toughness by using low constraint specimens. This paper reviews two kinds of fracture parameters based on CTOD and CTOA, which can characterize the deformation state of the crack tip. The present research status and the development trend of these test methods are summarized. A variety of factors influencing the testing accuracy of the fracture toughness for the pipeline steels are analyzed, and suggestions are made to improve the experimental design for measuring the fracture toughness of pipeline steels. |
| |
| Keywords: | pipeline steels fracture toughness testing method crack tip opening displacement (CTOD) cracktip opening angle (CTOA) |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《力学与实践》浏览原始摘要信息 |
| 点击此处可从《力学与实践》下载免费的PDF全文 |
