首页 | 本学科首页   官方微博 | 高级检索  
     检索      

整体壁板挤压模应力分析和提高强度的措施
引用本文:王匀,刘全坤,王雷刚.整体壁板挤压模应力分析和提高强度的措施[J].力学与实践,2002,24(6):0-0.
作者姓名:王匀  刘全坤  王雷刚
作者单位:1. 燕山大学机械工程学院,秦皇岛,066001
2. 合肥工业大学材料科学与工程学院,合肥,230009
基金项目:国家自然科学基金项目(50075022)资助.
摘    要: 铝型材整体壁板断面宽高比大(50~100以上)、形状复杂、精度 高、壁薄以及外形轮廓与长度尺寸大等特点决定了其在大型挤压机上 采用扁挤压筒进行挤压的生产方式. 扁挤压筒的设计与制造是大型铝 合金型材挤压最为重要的关键技术,因此对其进行应力分析十分必要. 利用ANSYS有限元方法比较分析了扁挤压筒和圆挤压筒的受力特点,还 提出了提高扁挤压筒强度的具体措施.

关 键 词:整体壁板挤压  扁挤压筒  ANSYS  
修稿时间:2002年7月23日

STRESS ANALYSIS OF INTEGRATED WALLBOARD EXTRUSION MOULD AND RELATED DESIGN PROBLEMS
WANG Yun.STRESS ANALYSIS OF INTEGRATED WALLBOARD EXTRUSION MOULD AND RELATED DESIGN PROBLEMS[J].Mechanics and Engineering,2002,24(6):0-0.
Authors:WANG Yun
Abstract:The integrated wallboard extrusion for aluminum profiles feature high width -height ratio of section (about 50 - 100), complex shape, high precision and large size. Therefore, the wallboard has to be extruded with a flat extruding tube in a large extruder. The design and manufacture of the flat extruding tube are the key technology in the wallboard extrusion. It is necessary to analyze the stresses in the flat extruding tube. In this paper, the stresses in the flat extruding tube and round extruding tube are compared and analyzed with ANSYS finite element method, and the corresponding design proposals are made.
Keywords:Whole wallboard extrusion  Flat extruding tube  ANSYS  Shrinkage range
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《力学与实践》浏览原始摘要信息
点击此处可从《力学与实践》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号