| 缝合复合材料层板面内局部纤维弯曲模型及剪切强度预报 |
| |
| 引用本文： | 李晨,许希武.缝合复合材料层板面内局部纤维弯曲模型及剪切强度预报[J].固体力学学报,2007,28(3):287-292. |
| |
| 作者姓名： | 李晨 许希武 |
| |
| 作者单位： | 南京航空航天大学航空宇航学院,南京,210016 |
| |
| 摘 要： | 提出了面内局部纤维弯曲模型,基于有限元法和周期性边界条件建立了缝合层板面内剪切强度分析方法,采用桥联模型和最大应力判据分析损伤扩展并获得面内剪切强度,预报结果与试验吻合较好,探讨了缝合参数对层合板面内剪切强度的影响规律,结果表明缝合削弱了层合板的面内剪切强度,缝合针距和行距越大对面内剪切强度越有利,较细的缝合线对面内剪切强度有利.
|
| 关 键 词： | 缝合复合材料层板 面内剪切强度 纤维弯曲 有限元 桥联模型 |
| 修稿时间： | 2006-01-18 |
IN-PLANE LOCAL FIBER WAVINESS MODEL AND PREDICTION OF SHEAR STRENGTH OF STITCHED LAMINATES |
| |
| Li Chen,Xu Xiwu.IN-PLANE LOCAL FIBER WAVINESS MODEL AND PREDICTION OF SHEAR STRENGTH OF STITCHED LAMINATES[J].Acta Mechnica Solida Sinica,2007,28(3):287-292. |
| |
| Authors: | Li Chen Xu Xiwu |
| |
| Abstract: | In-plane local fiber waviness model was presented.Based on finite element method and periodic boundary conditions,a method to analyze the shear strength of stitched laminates was established.The method adopted bridging model and maximum stress criteria to predict the development of damage and obtain the shear strength.Good agreement was found between the predicted results and the test data.The effects of stitching parameters on the shear strength of stitched laminates were discussed in detail.The results indicate that stitching weakens the in-plane shear strength of composite laminates.In addition,large stitch spacing,row spacing and thin stitch are beneficial to the in-plane shear strength. |
| |
| Keywords: | stitched laminates in-plane shear strength fiber waviness finite element bridging model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
