首页 | 本学科首页   官方微博 | 高级检索  
     检索      

CFETR 水冷包层电磁结构耦合分析
引用本文:王开松,杨皓,徐坤.CFETR 水冷包层电磁结构耦合分析[J].核聚变与等离子体物理,2021,41(1):45-50.
作者姓名:王开松  杨皓  徐坤
作者单位:(1. 安徽理工大学机械工程学院,淮南 232001;2. 中国科学院等离子体物理研究所,合肥 230031)
基金项目:国家重点研发计划(2017YFE0300500)。
摘    要:利用软件 Maxwell 对中国聚变工程实验堆(CFETR)高场侧的水冷陶瓷增殖(WCCB)包层进行电磁分析,得到了包层在等离子体电流线性 36ms 衰减工况下产生的电磁载荷。采用载荷传递耦合法,结合软件 ANSYS可得包层中产生的形变位移和等效应力。分析结果表明,WCCB 包层中产生的最大等效应力符合设计要求,且形变位移均在许用范围之内,初步验证了包层结构设计的合理性。

关 键 词:中国聚变工程实验堆  水冷陶瓷增殖包层  电磁分析  等离子体主破裂   
收稿时间:2019-10-23

Electromagnetic-structural coupling analysis of CFETR water cooled blanket
WANG Kai-song,YANG Hao,XU Kun.Electromagnetic-structural coupling analysis of CFETR water cooled blanket[J].Nuclear Fusion and Plasma Physics,2021,41(1):45-50.
Authors:WANG Kai-song  YANG Hao  XU Kun
Institution:(1. School of Mechanical engineering, Anhui University of Science and Technology, Huainan 232001;  2. Institute of Plasma Physics, Chinese Academy of Science, Hefei 230031) 
Abstract:The electromagnetic analysis of the water cooled ceramic breeder(WCCB)blanket in the high field side on China Fusion Engineering Test Reactor(CFETR)was calculated by Maxwell.The electromagnetic load of the blanket under the linear 36 ms attenuation of plasma current was obtained.The deformation displacement and the equivalent stress of the blanket were calculated by using the load transfer coupling method and ANSYS.The results show that the maximum equivalent stress of the WCCB blanket meets the design requirements,and the deformation displacement is within the allowable range,which preliminarily verifies the rationality of the blanket structure design.
Keywords:CFETR  Water cooled ceramic breeder(WCCB)blanket  Electromagnetic analysis  Plasma major disruption
本文献已被 维普 等数据库收录!
点击此处可从《核聚变与等离子体物理》浏览原始摘要信息
点击此处可从《核聚变与等离子体物理》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号