Effects of laser irradiation energy density on the properties of pulsed laser deposited ITO thin films |
| |
| Authors: | FO Adurodija R Brüning IO Asia H Izumi T Ishihara H Yoshioka |
| |
| Institution: | (1) Physics Department, Mount Allison University, 67 York Street, Sackville, N.B., E4L 1E6, Canada;(2) Chemistry Department, Ambrose Alli University, Ekpoma, Nigeria;(3) Hyogo Prefectural Institute of Industrial Research, 3-1-12 Yukihira-cho, Suma-ku, Kobe 654-0037, Japan |
| |
| Abstract: | The properties of indium tin oxide (ITO) thin films, deposited at room temperature by simultaneous pulsed laser deposition (PLD), and laser irradiation of the substrate are reported. The films were fabricated from different Sn-doped In2O3 pellets at an oxygen pressure of 10 mTorr. During growth, a laser beam with an energy density of 0, 40 or 70 mJ/cm2 was directed at the middle part of the substrate, covering an area of ∼1 cm2. The non-irradiated (0 mJ/cm2) films were amorphous; films irradiated with 40 mJ/cm2 exhibited microcrystalline phases; and polycrystalline ITO films with a strong 〈111〉> preferred orientation was obtained for a laser irradiation density of 70 mJ/cm2. The resistivity, carrier density, and Hall mobility of the ITO films were strongly dependent on the Sn doping concentration and the laser irradiation energy density. The smallest resistivity of ∼1×10-4 Ω cm was achieved for a 5 wt % Sn doped ITO films grown with a substrate irradiation energy density of 70 mJ/cm2. The carrier mobility diminished with increasing Sn doping concentration. Theoretical models show that the decrease in mobility with increasing Sn concentration is due to the scattering of electrons in the films by ionized centers. PACS 81.15.Fg; 73.61.-r; 73.50.-h |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
